FEATURE SETTINGS
Set Home Area Code (HAC)
Home area code is the area code associated with your telephone number. It is necessary to program a home area code so the telephone can properly display incoming calls and dial the telephone numbers from the call log.
1.After setting the contrast (or press OPTIONS twice in idle screen), the screen will display:
HAC -_ _ _
HOME AREA CODE?
2.Press P or Q until the screen displays the first digit of your home area code.
Do not use the keypad to enter digits.
3.Press DISPLAY DIAL to save the digit and advance to the next digit.
4.Repeat steps 2 and 3 for the second and third digits of your home area code.
5.Press OPTIONS to save the home area code and continue to set the local area code.
If you dial… | For… | Then, in steps |
7 digits | Calls within your own area | Enter your own area code. |
(phone number only, | code |
|
no area code) |
|
|
10 digits |
| Enter 0 0 0, then follow |
(area code + phone |
| the directions in Set |
number) |
| Local Area Codes on |
OR |
| page 20. |
11 digits |
|
|
1 + area code + phone |
|
|
number) |
|
|
NOTE: There is no visual or audible confirmation when setting a new home area code.
19