Ultratec CapTel user manual Setting UP the Captel for 2-LINE USE, Set up phone for 2 line

Page 5

SETTING UP THE CAPTEL FOR 2-LINE USE

Note: You must follow this procedure to turn on 2-line CapTel service. Simply plugging a second line into the CapTel phone will not activate 2-line capabilities.

There are two steps to setting up your CapTel. First, set it up in standard mode. Then, activate the 2-line menu.

Set up phone for 2 line

1.Plug the AC adapter cord into the round power jack on the bottom of the CapTel.

2.Plug the first telephone line cord

into the jack marked with the wall-jack icon on the bottom of the CapTel (illustrated as Line 1).

Note: This phone line should be the primary telephone number of your home/office, the phone number you would give to people to call you.

3.Plug the second telephone line cord into the other telephone jack (no symbol) on the bottom of the CapTel.

4.Plug the telephone line cords into the appropriate wall jacks and the AC adapter into an electrical outlet.

3

Image 5
Contents User Guide Page Congratulations Requirements for 2-LINE Captel HOW 2-LINE Captel WorksSet up phone for 2 line Setting UP the Captel for 2-LINE USEActivate 2-Line Menu Placing a Call with CaptionsAnswering a Call with Captions If the Caption Feature is onIf the Caption Feature is OFF Turning Captions ON/OFF During a Call Using CALL-WAITINGDialing 9-1-1 with 2-LINE Captel Dialing 7-1-1 with 2-LINE Captel Tips & Hints