AEG 20 Configuration, Setting the ringer volume, Insert a pause, Setting the dialing mode

Page 7

Configuration

Setting the ringer volume

The volume of the ringer can be set to low, medium or high, using the sliding switch on the side of the appliance. It can also be switched off.

Insert a pause

When you use the telephone connected behind an older PABX, it is possible that the access code for external calls (generally "0") must be followed by a pause, before the telephone number may be dialed.

h	Unhook.
n	Enter the access code for external calls.
Pause	Press the pause key, the pause is inserted.
n	Enter the telephone number you wish to call.

Setting the dialing mode

Two dialing modes are available:

• MFV (tone):

the actual standard (DTMF mode)

•IWV (impulse): only necessary for older installations

To set the dialing mode, use the sliding switch (F) on the side of the appliance, T for tone dialing, P for impulse dialing.

AEG Milano 20_en

Image 7

Contents Milano Table of Contents Appliance overview Description of the ApplianceSide-views of the base Default settings set in the factoryContents of the packing Installation of the applianceSpecific features Congratulations Safety precautionsInsert a pause ConfigurationSetting the ringer volume Setting the dialing modeSetting the Flash time Redial simple Using the telephoneAnswering an incoming call Calling OutsideWaiting call and toggling Comfort functionsConsultation and toggling Turning off the microphone Mute Conference call with three peopleSaving telephone numbers Appendix WarrantyDialing a number impossible Technical dataTroubleshooting No dialing tone MaintenanceIndex AEG Milano 20en Environmental Protection CE declaration of conformity