AEG 20 user manual Installation of the appliance, Contents of the packing, Specific features

Page 5

Contents of the packing

1 base

1 handset

1 cable for the handset

1 telephone line cord

1 manual

Specific features

Re-dialing of the last number dialed

Re-dialing with pause

Volume of the ringer selectable in 3 levels or switched off

Table appliance

Can be used in connection with a switchboard

Tone or pulse dialing – Flash-time adjustable

LED for optical call indication

Mute (microphone switched off)

3 memories for shortcut dialing M1-M3, 10 indirect memories 0-9

Installation of the appliance

1.Use the telephone line cord to realize the connection between the tele- phone outlet and the connection (G) at the back of the base.

2.Connect the handset cable to the inlet (D) of the base (A) and to inlet (C) of the handset (B).

This manual is meant for your information. Its contents are no part of the contract. All values quoted are standard values.

The described equipment and the options can be different, depending on the requirements of your country. We reserve our right to technical modifications.

AEG Milano 20_en

5

Image 5
Contents Milano Table of Contents Appliance overview Description of the ApplianceSide-views of the base Default settings set in the factorySpecific features Installation of the applianceContents of the packing Congratulations Safety precautionsSetting the ringer volume ConfigurationSetting the dialing mode Insert a pauseSetting the Flash time Answering an incoming call Using the telephoneCalling Outside Redial simpleConsultation and toggling Comfort functionsWaiting call and toggling Saving telephone numbers Conference call with three peopleTurning off the microphone Mute Appendix WarrantyTroubleshooting No dialing tone Technical dataMaintenance Dialing a number impossibleIndex AEG Milano 20en Environmental Protection CE declaration of conformity