Setting the Flash time

The flash-time can be set to short (100 ms) or long (300 ms). The flash-time to be used depends on the installation, on which your unit is connected

•connected to the public telephone network with comfort functions;

•connected to a PABX with similar functions.

The comfort functions:

waiting call toggling consultation second call conference call with three

must be ordered and paid for with your local telephone network operator. Your provider will also be able to tell you, which flash-time has to be used on his in- stallation (the flash-time to be set is usually long or 300 ms).

When the appliance is connected to a personal PABX, its supplier or the deliv- ered manual can inform you about the flash-time to be set (the flash-time to be set is usually short or 100 ms). The following description does not necessarily correspond to the description in the manual of your PABX.

The flash-time can be set to 100 or 300 ms with the slide switch (E) on the side of the appliance.

8	AEG Milano 20_en