SPECIFICATIONS
Physical Dimensions
Size: 8.1" x 9.5" x 2.75"
Weight: 2 lb. 4oz.
Keypad
Large Keys: 1.15" x 0.8"
Large Print: .65" (62 pt)
Function Buttons
Redial
Flash
Volume
Outgoing Volume
Hold
Mute
Controls
Conversation:
Volume
Tone
Dual Tone (Crystal Tone)
Ringer:
On/Off
Pitch
Volume
Indicator Lights
Outgoing Volume
Volume
Hold
Mute
Ring Indicator
Handset
Type: HAC(Hearing Aid Compatible)
Style:
Dialing
Memory:
Redial
10
3 EmergencyDial buttons
Pulseor Tone
Connections
Line:
Plugs into a standard, analog telephone line.
Audio Jack: 3.5 mm
For use with some assistive listening devices and headsets.
Approvals
FCC approved
FCC registration number:
REN: 0.9B
FCC INFORMATION
This equipment generates and uses radio frequency energy and if not installed and used properly, that is, in strict accordance with the manufacturer’s instructions, may cause interference with the radio and television reception. The CrystalTone has been tested and found to comply with the specifications for a Class B computing device in accordance with the specifications in Subpart J of Part 15 of the FCC Rules. These rules are designed to provide reasonable protection against radio frequency interference in residential installations.
There is no guarantee that interference will not occur during use. You can determine if this equipment causes interference to radio or television reception by turning the CrystalTone on and off while the television or radio is on.
If this equipment does cause interference the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient the radio or television receiving antenna.
Move the CrystalTone further away from the radio or television.
If necessary, consult an experienced radio/television technician or the manufacturer for additional suggestions.
The user may find the following booklet prepared by the Federal Communications Commission helpful: Interference Handbook. This booklet is available from the Superintendent of Documents, U.S. Government Bookstore, 310 W. Wisconsin Ave., Suite 150, Milwaukee, WI 53203, (414)
This equipment complies with Part 68 of the Federal Communications Commission (FCC) rules for the United States.
The telephone jackused on the CrystalTone complies with FCC Part 68, Subpart F rules and regulations and is an RJ11C.
A label is located on the underside of the CrystalTone containing the FCC registration number and the Ringer Equivalence Number (REN). You must, upon request, provide the following information to your local telephone company: USOC Jack Type: RJ11; REN: 0.9B.
Should you experience trouble with this telephone equipment, please contact Ultratec National Service Center,
5901 Research Park Blvd., Madison, WI 53719. Email: service@ultratec.com
The REN is used to determine the quantity of devices which may be connected to the telephone line. Excessive RENs on the telephone line may result in the devices not ringing in response to an incoming call. In most, but not all, areas the