Ultratec 305-009901 manual Adjusting the Sound

Page 8

ADJUSTING THE SOUND

CONVERSATION VOLUME

To increase the overall volume of the person’s voice coming through the handset:

1. Press the VOL button. The red light comes on.

2.Slide the VOLUME control, located on the top of the CrystalTone , toward the right side of the phone until the volume is a comfortable level for you.

VOLUME

To return the volume to your preferred setting, press the VOL button at any time during a conversation. The red light comes on, and the CrystalTone recalls the settings for:

Conversation Volume

Conversation Tone

The amplification turns off when you hang up the handset.

CONVERSATION TONE

The CrystalTone has two controls that work together to adjust the tone of the sounds coming through the handset. You may wish to experiment to see which works best for you.

1.Set the Crystal Tone switch, located on the bottom, to setting “A.” This enhances sound for people with high- frequency hearing loss.

2. Press the VOL button. The red light comes on.

3.Move the TONE slide control to experience the sound changes

while the other person is talking. If you slide it up, toward the top of the phone, more high-pitched sounds will come through the handset.

4.Set the Crystal Tone switch to setting “B.” People who experience low-frequency hearing loss may prefer this setting.

5.You can experiment with different combinations of Crystal Tone setting A or B and Tone setting from low to high to get the most effective setting.

6.When you have found the setting that works best for you, leave the Crystal Tone switch in place.

Each time you press the VOL button, the CrystalTone will return to your previous settings. You may wish to adjust the TONE slide control from time to time depending on who you are speaking with.

RING VOLUME

You can set the Ring Volume to Off, Low, Medium or High with the switch on the bottom of the CrystalTone .

RINGER ON/OFF

You can turn the ringer off using the RINGER switch on the right side of the CrystalTone . This will also turn off the Ring Indicator, so it will not light up when you get a call.

RING PITCH

You can change the ringer pitch with the switch on the bottom of the CrystalTone . Choose from low, medium or high pitch.

6 SOUND ADJUSTMENTS

Image 8
Contents CrystalTone Second edition May First printing Ultratec, Inc Contents CongratulationsOverview Overview Installation Selecting a LocationAnswering a Call Calling & AnsweringPlacing a Call Adjusting the Sound Using Call Features Using FlashUsing Hold Using MuteSaving Phone Numbers Hang up the handsetCleaning Problem SolvingVolume on Care & RepairSpecifications FCC InformationAvis Dindustrie Canada Specifications Index General Safety