CM16.book Page 12 Friday, June 18, 2004 3:22 PM
•Once the selected number appears on the display, press the Options softkey — the display shows Save 4Directory and s=Next
•Press the Select softkey. If there is no name associated with the number, the display will prompt, to enter a name to save the entry. Use the instructions in the section Adding a Name and Number to the Directory to save the entry in the Directory. If there is a name associated with the number it will automatically save it to the directory and briefly indicate item saved.
To delete an entry in the Redial list:
•Press r key, and use the E and the L keys to scroll up and down through the list of the last ten numbers dialed
•Once the selected number appears on the display, press the Options softkey and the L key once — the display shows Delete and s=Next
•Press the Select softkey. The display will show Delete again to erase this item.
•Press the Delete softkey to erase the entry. Display shows Item erased.
You can return to the main display any time by pressing the I key.
HOLD FUNCTION
To place a call on hold, press the O key. To take a call off hold, press the
Okey again.
MUTE KEY
Use the mute key when you want to be able to hear a caller but have
them not hear you. Press the Xkey to mute the handset. Press the Xkey again to disengage mute.
ALERTER TONES
The
Low Battery | one tone every three minutes |
|
|
Out of Range | whenever handset loses connection to base station |
|
|
Check | Whenever you try to establish a link with the base |
Line Cord | station and the DC power is not plugged in and/or |
| the line cord is not plugged into the base. |
|
|
VOLUME CONTROL
The volume key, located on the side of the handset, controls both the receiver and ringer volume.
Model