Aastra Telecom CM-16 manual Vibrate, Handset Pairing, Key Lock

Page 18

CM16.book Page 17 Friday, June 18, 2004 3:22 PM

Vibrate

The Vibrate option allows the CM-16 handset to signal an incoming call by vibrating as well as ringing. By default, this option is always Off.

To enable this feature, press the Change softkey and the display will indicate Vibrate On and-confirmed-and will quickly return to the previous menu display.

Once the Vibrate is On, the is shown beside the ringer icon on the top right line of the display.

Pressing the I key will return you to the main idle display screen.

Handset Pairing

The Handset Pairing option provides flexibility by allowing any CM-16 handset to work with any CM-16 base station. Each handset is factory programmed to work only with the base station shipped with the product.

When using this option, be sure to keep the handset at least a few feet away from the base station. The handset does not need to be placed right in front of the base station when pairing and may not, in fact, be able to pair if too close to the base station.

To program the handset to work with another CM-16 base station in this option, press the Change softkey and the display will indicate Attempting pairing. If successful, the display will indicate Pairing successful. If the pairing does not occur, the display will indicate Pairing failed Try again.

Pressing the I key will return you to the main idle display screen.

Key Lock

The key lock option enables the user to lock the keypad keys. This prevents accidental activation of the phone while carrying it, putting in a pocket etc.

To lock the keys from the key lock option page:

•Press Change softkey to turn Key lock ON or Off. The screen will display

Key lock On or Key lock Off -confirmed-

Pressing the I key will return you to the main idle display screen.

Note: You can active the Key Lock Off or On by pressing only the M key and then the * asterisk key.

17Model CM-16 User Guide

Page 17 Page 19
Image 18
Page 17 Page 19
Contents CM16.book Page i Friday, June 18, 2004 322 PM Table of Contents Safety Information Handset and Base StationBatteries Regulatory Information Installation Base StationCharging Cradle Figure aBattery Status Icons Battery ChargingUsing a Headset with your Telephone Belt ClipCM-16 Handset KEY Functions CM16.book Page 8 Friday, June 18, 2004 322 PM Screen Display Screen IconsScreen Prompts Making and Answering Calls RedialHold Function Volume ControlTo delete an entry in the Redial list Mute KEYFeatures List To adjust the receiver volumeTo adjust the ringer volume Status LightOptions LanguageTo edit key label text To delete all feature label textKey label To delete a single key labelCall Timer Ring ToneCustom Name Handset Pairing VibrateKey Lock Backlight Silent AlertDirectory Adding a name and number to the DirectoryEntering Letters and Characters Finding entries in the Directory Dialing from the DirectoryChanging entries in the Directory Deleting an entry in the Directory Deleting all entries in the DirectoryLimited Warranty ExclusionsWarranty Repair Services After Warranty ServiceCM16.book Page 23 Friday, June 18, 2004 322 PM Index CM-16 Handset KEY FunctionsStatus Light
Top Page Image Contents