Telos Zephyr Xport manual What you need before you start…, Success, Step-by-Step

Page 14

ZEPHYR XPORT USER’S GUIDE

•Promise to read the full manual later.

Now, let’s get started.

What you need before you start…

To complete the following you will need:

•Your Zephyr XPORT

•A standard "RJ- 11 style" telephone cable (supplied with the XPORT)

•A pair of headphones that use a standard 1/4 stereo connector

•A dynamic Microphone, together with a cable ending with a 3- pin XLR "male" connector. Xport can be used with condenser microphones, but phantom power must be enabled. This is beyond the scope of this section.

•A Plain Old Telephone line (analog loop start line).

Success, Step-by-Step:

Connecting the Audio Inputs/Outputs

You want to hear something, don’t you? Connections are needed for sending audio to the remote location and receiving audio. You will need to provide a microphone and headphones, along with an appropriate cable.

Headphones

Connect your headphones to the headphone jack on the rear panel.

Microphone

Connect your dynamic microphone to the MIC. INPUT jack on the rear panel using an appropriate cable (normally an XLR male to XRL female).

Connecting to the Telephone Line

Connect the modular cable to the jack on the XPORT labeled POTS LINE. Attach the other end to the telephone jack. In some countries, you may need an adaptor. These are readily available at most airports and many electronic stores.

wIMPORTANT NOTE! Xport is for use with "Plain Old (analog loop- start) Telephone Service (it can also be used with ISDN, but we'll cover that later).

Be sure the line you connect to your Xport really is an analog line. In many offices, and some hotels, you will find perfectly ordinary- looking phones that are connected to in- house phone systems using special, proprietary lines. DO NOT connect your Xport to such lines. See Section 3 for more information.

4CHAPTER 2 - GETTING STARTED

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Zephyr Xport Xports Front Panel Mixer SectionZephyr Xport Customer Service Fax +1Important Note Test Lines Introducing the Xport VI Introducing the Xport Table of Contents Specifications & Warranty Looking for Information? Tell me more about the box Getting Oriented Quick StartWhat you need before you start… Connecting the Audio Inputs/OutputsConnecting to the Telephone Line Success, Step-by-StepSetting the Country Basic ConfigurationPowering Up Time to turn on the XportPlacing Your First Call, to Telos Mixer AdjustmentsHeadphones MicrophoneWhat’s Next? Snd RcvFront panel AccessoriesWhat have we here? Default Display Pots Connection Status see .1.2 for Isdn Connection statusExample 1 Selecting a setting from a list country MenusMore on the Numeric Keypad Entering Alphabetic Characters Example 2 Entering a numeric entry i.e. entering a prefixXport Frequently Used Menus AUTO, DIAL, & DropDial menu Zephyr Rear panelPhone Isdn Support Pots DetailsTelephone Connections Isdn Interface Optional Interface only active if option 1701-00056 is presentAudio Connections & Mixer InputAudio Inputs Audio OutputsAUX Interface connector Interface ConnectorSetups AUX Interface Input ring & sleeveDial Setups Activating a Dial Setup Step by StepLocation Setups Activating a Location Setup Step by Step Creating Location Setups Set by StepEditing Location Setups Isdn Configuration Menu Xports Isdn interfaceConnecting two Xports to the same Isdn circuit Sharing Isdn in the USA & CanadaCell Phone Interfacing the Aux Audio Interface Sharing Isdn worldwideFeeding the Xport from a computer over Ethernet Connecting the Cell Phone to the XportInstallation Telos Soundcard EmulatorSelecting a Playback Device Changing configurationConfiguring Windows Sounds and Media Remote Control Changing the playback volumeFrequently Asked Questions Is Xport a Pots codec?What about international calls? What happens when the line is very bad?Can I share an Isdn line between two Xports? So what is the Aux Interface connector for? Tell me more about the Ethernet?Where can I get answers to my technical questions? Anything better possible with mobile phones?How can I tell if my Xport has the Isdn option? Why does my Isdn Xport take so long to boot up?What to do if… Can’t find the Isdn setup menu Is the line shared between the Xport and any other device?Can’t place a call using Isdn in Zephyr mode Can the Xport place a call to a Telephone?Can’t place or receive calls using Isdn Environmental Considerations Technical & Installation InformationVentilation and ambient temperature AC mains requirementsInstalling the Isdn option Echnical & Installation Ifnormation Enabling Phantom Power Female Specifications & WarrantyDelay round trip Line Input balanced ¼ TRSHeadphone Output Monitor MIX OUT Floating Balanced ¼ TRS Mix POT set to SendZephyr Xport Limited Warranty Technology Articles ReferencesOrdering Isdn White Papers Xports Rear Panel Output

Zephyr Xport specifications

The Telos Zephyr Xport is a cutting-edge audio-over-IP codec that seamlessly revolutionizes the way audio is transmitted over networks. Renowned for its high-quality sound, this powerful codec is designed for both radio broadcast applications and professional audio environments, enabling efficient, reliable, and high-fidelity audio transport over IP networks.

One of the main features of the Zephyr Xport is its ability to handle multiple audio formats, including PCM, AAC, and MP3, which provides users with flexibility depending on their specific needs. Its ability to encode and decode audio ensures that broadcasters can deliver outstanding quality both on the air and in streaming applications.

The technology behind the Zephyr Xport includes advanced algorithms that minimize latency, making it ideal for live broadcasts where real-time transmission is crucial. With a low latency rate, users can enjoy audio transmission that is nearly instantaneous, a defining feature for any live event or remote broadcasting situation.

Another standout characteristic of the Zephyr Xport is its support for multiple network protocols, including RTP/RTCP, SIP, and POTS. This versatility allows integration with a wide range of existing equipment and infrastructures, facilitating easy implementation in various settings. Additionally, the codec boasts robust error correction and adaptive bitrate control to ensure audio clarity even in fluctuating network conditions, reducing the chances of dropouts or interruptions.

The user-friendly interface of the Zephyr Xport features an intuitive LCD display, making it easy for operators to configure settings, monitor audio levels, and manage network connections. With built-in web access, users can make adjustments and control the unit remotely, providing added convenience for situations where operators are away from the hardware.

Moreover, the Zephyr Xport is designed for durability and reliability, constructed to endure the demands of a fast-paced broadcast environment. Its compact design makes it suitable for rack mounting or portable use, allowing broadcasters to take it on location without hassle.

In summary, the Telos Zephyr Xport combines advanced audio processing technologies with user-friendly features, making it an essential tool for modern broadcasters. Its high-quality audio performance, low latency communication, versatile protocol support, and ease of use exemplify the future of audio transmission in the ever-evolving landscape of digital broadcasting. As the industry continues to embrace IP-based solutions, the Zephyr Xport stands out as a vital asset for any professional audio application.
Top Page Image Contents