SETUP PROCEDURE
DO NOT CONNECT the line cord to the wall outlet until the caller ID setup has been completed. Set the language, contrast, time and date as follows:
BASIC OPERATIONS
PLACING A CALL
Press and hold the [] and [] buttons simultaneously for four seconds until "ENTER LANGUAGE" appears, followed by "ENG ESP FRA" for 20 seconds.
SELECT THE CONTRAST:
Press the [] or [] button to select one of the five contrast levels (default is three). Press the ERASE button to confirm.
Press the [] or [] button to select the present month. Press the ERASE button to confirm. Repeat this step to set the day. The settings are now complete.
SELECT THE LANGUAGE
Press the [] or [] button to select ENG (English), ESP (Spanish) or FRA(French). Press the ERASE button to confirm.
SELECT THE TIME AND DATE: Press the [] or [] button to select the present hour. Press the ERASE button to confirm. Repeat this step to set the minutes.
Lift the handset and listen for a dial | Press the Key buttons |
tone. | desired number you wish to call. |
RECEIVING A CALL
The last 64 incoming calls are saved in the caller ID log.
Make sure that the Caller ID service is turned on by your phone company. When you receive a call, the display will show the name of the caller, number, time and date of the call. The NEW icon will appear in the display and the NEW CALL indicator will blink. To answer the call, simply remove it from the base. To end a call, simply return the handset to the base.
NOTES:
•Hello Kitty Wings and Wand will light when an incoming call is received. This visual ring signal will operate even if the Ringer switch is set to the OFF position.
•If a call is received from an area which does not provide caller ID service, the display will show, “UNKNOWN”. If a call is received from outside the Caller ID area, the display will show, “UNAVAILABLE”.
•If a call is received from a caller that has blocked his/her information, the display will show, “PRIVATE CALL” or “BLOCKED CALL.
•When you receive the first call, the unit will automatically set the correct time and date.
•Calls picked up on the first ring will not be logged in the caller ID log.
•If there are new calls, the NEW icon will appear in the display and the NEW CALL indicator will blink.
To reset, press and hold the [] / [] buttons simultaneously for four seconds until “ENTER LANGUAGE” appears.
Note: When you receive the first call, the unit will automatically set the time and date.
11
•If an incorrect, invalid or incomplete caller ID signal is received, the display will show “LINE ERROR”.
12