|
|
|
|
|
| Grandstream Networks, Inc. | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Firmware Key: |
|
|
|
|
| (in Hexadecimal Representation) | |
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
| ||
|
|
|
|
| No |
| Yes (cfg file would be authenticated before acceptance if set to | ||
|
| Authenticate Conf File: |
|
|
| ||||
|
|
|
|
| |||||
|
|
| Yes) |
|
|
|
| ||
Lock keypad update:
Allow conf SIP Account in Basic Settings:
Override MTU Size:
No |
| Yes (configuration update via keypad is disabled if set to Yes) |
No 
Yes
0
Update
Cancel
Reboot
All Rights Reserved Grandstream Networks, Inc. 2005
Admin Password
SIP Server
Outbound Proxy
SIP User ID
Authentication
ID
Authenticate Password
Preferred
Vocoder
G723 Rate:
Administrator password. Only administrator can configure the “Advanced Settings” page. Password field is purposely blanked for security reason after clicking update and saved. The maximum password length is 25 characters.
IP address or FQDN domain name provided by VoIP service provider. e.g., the following are some valid examples:
IP address or FQDN domain name of Outbound Proxy (or called Media Gateway or Session Border Controller). Used by IP phone for firewall or NAT penetration in different network environment. If symmetric NAT is detected, STUN will not work and ONLY outbound proxy will provide solution for it.
User account information, provided by VoIP service provider (ITSP), usually has the form of digits similar to phone number or actually a phone number
ID used for authentication, usually same as SIP user ID, but could be different and decided by the ITSP
Account information, password for IP Phone to register to (SIP) servers of ITSP. Maximum length is 25 characters.
The BudgeTone IP phone supports up to 8 different codec types including
A user can configure codecs in a preference list that will be included with the same preference order in SDP message. The first codec in this list can be entered by choosing the appropriate option in “Choice 1”. Similarly, the last codec in this list can be entered by choosing the appropriate option in “Choice 8”.
Encoding rate for G723 codec. By default, 6.3kbps rate is set.
- 31 -