Jensen Tools 100 Sereis user manual Grandstream Networks, Inc

Page 37

BudgeTone-100 User Manual

Grandstream Networks, Inc.

 

 

 

Firmware

Upgrade and

Provisioning

Firmware Server Path

Config Server Path

Firmware File Prefix

Firmware File Postfix

Config File Prefix

Config File

Postfix

Firmware upgrade and Provisioning can be done via either TFTP or HTTP. This is mutual exclusive choice.

Default if HTTP.

Via TFTP: (default is pointing to Grandstream Firmware TFTP server)

The TFTP server needs to be configured. If it is non-zero or not blank, the IP phone will attempt to retrieve new configuration file or new firmware from the specified TFTP server at boot time. It will make up to 3 attempts before timeout and then it will start the boot process using the existing code image in the Flash memory.

Be very careful when the TFTP is in progress (the phone’s LCD backlight will be ON). Do NOT interrupt the process (especially the power supply) otherwise might make the phone broken.

Be patient as in some network environment this process will take up to 15 minutes.

Via HTTP: (default is pointing to Grandstream Firmware HTTP server)

The URI for the web server used for firmware upgrade and configuration. For example, http://provisioning.mycompany.com:6688/Grandstream/1.0.8.16

Here “:6688” is the specific TCP port that the HTTP server is listening to, it can be omitted if using default port 80.

IP address or domain name (URI) of firmware server. Default to Grandstream’s firmware server

IP address or domain name (URI) of configuration server. Default to Grandstream’s server. It can be different with Firmware server.

Default blank. If configured, the phone will request the firmware file with the prefix.

Useful for provisioning of ITSPs. End user should keep it blank.

Default is blank. Similar to Prefix. End user should keep it blank.

Default is blank. The phone will request configure file prefix is configured. Used by ITSP for provisioning. End user should keep it blank.

Default is blank. End user should keep it blank.

- 37 -

Page 36 Page 38
Image 37
Page 36 Page 38
Contents BudgeTone-100 Series Table of Contents Grandstream Networks, Inc Welcome LCD InstallationInterconnection Diagram Safety Compliances What is Included in the PackageWarranty Product Overview Key FeaturesHardware Specifications Model BudgeTone-101 BudgeTone-102 Get Familiar with LCD/LED Basic OperationsIcon LCD Icon Definitions Key Button Key Button Definitions Get Familiar with KeypadMessage Make Calls using IP Address Make Calls using NumbersMake Phone Calls Answer an Incoming Call Handset Mode, Speakerphone/Headset ModeCall Hold Call Waiting and Call FlashingBlind Transfer Call TransferAttended Transfer Conference Call Key Call Features Call FeaturesConfiguration with Keypad Configuration GuideMenu Item Menu Functions Display 7 G-711u Display 9 codE rEL Menu Item Menu Functions Access the Web Configuration Menu Configuration with Web BrowserStatus Configuration MenuNAT End User Password IP Address Basic SettingsGrandstream Networks, Inc Status Basic Settings Advanced Settings Advanced SettingsDisable Call-Waiting Send Dtmf All Rights Reserved Grandstream Networks, Inc Grandstream Networks, Inc Grandstream Networks, Inc MWI Grandstream Networks, Inc Syslog level Grandstream Networks, Inc Saving the Configuration Changes Click to relogin Rebooting the Phone from RemoteConfiguration through a Central Server Upgrade through Http Software UpgradeUpgrade through Tftp Http//support.solarwinds.net/updates/New-customerFree.cfm Managing Firmware and Configuration File Download Firmware and Configuration File Prefix and PostfixStep Restore Factory Default SettingHeadset Connection Cross Over Cable For Plantronic Headset C d D c Glossary of Terms Did DNSDSP DtmfFXS Echo CancellationDhcp HttpIVR IP TelephonyMTU NTPRtcp PstnRTP SDPVAD UDPVlan VoIP
Top Page Image Contents