Jensen Tools 100 Sereis user manual Firmware and Configuration File Prefix and Postfix

Page 43

BudgeTone-100 User Manual

Grandstream Networks, Inc.

detailed parameter list or P values, please refer to the corresponding firmware release configuration template of the related products.

When Grandstream Device boots up or reboots, it will issue request for configuration file named “cfgxxxxxxxxxxxx”, where “xxxxxxxxxxxx” is the MAC address of the device, i.e., cfg000b820102ab”. The configuration file name should be in lower cases.

7.3Firmware and Configuration File Prefix and Postfix

Starting from firmware version 1.0.8.16 for BT-100 phone Rev 2.0, adding prefix and postfix for both firmware and configuration file is supported.

Firmware Prefix and Postfix allows device to download the firmware name with the matching Prefix and Postfix. This makes it the possible to store ALL of the firmware with different version in one single directory. Similarly, Config File Prefix and Postfix allows device to download the configuration file with the matching Prefix and Postfix. Therefore multiple configuration files for the same device can be stored in one directory.

In addition, when the field “Check New Firmware only when F/W pre/suffix changes” is set to “Yes”, the device will only issue firmware upgrade request if there are changes in the firmware Prefix or Postfix.

7.4Managing Firmware and Configuration File Download

When “Automatic Upgrade” is set to “Yes”, Service Provider can use P193 (Auto Check Interval, in minutes, default and minimum is 60 minutes) to have the devices periodically check with either Firmware Server or Config Server, whenever they are defined. This allows the device periodically check if there are any new changes need to be taken on a scheduled time. By defining different intervals in P193 for different devices, Server Provider can spread the Firmware or Configuration File download in minutes to reduce the Firmware or Provisioning Server load at any given time.

- 43 -

Page 42 Page 44
Image 43
Page 42 Page 44
Contents BudgeTone-100 Series Table of Contents Grandstream Networks, Inc Welcome LCD InstallationInterconnection Diagram Safety Compliances What is Included in the PackageWarranty Product Overview Key FeaturesHardware Specifications Model BudgeTone-101 BudgeTone-102 Get Familiar with LCD/LED Basic OperationsIcon LCD Icon Definitions Key Button Key Button Definitions Get Familiar with KeypadMessage Make Calls using IP Address Make Calls using NumbersMake Phone Calls Call Waiting and Call Flashing Handset Mode, Speakerphone/Headset ModeAnswer an Incoming Call Call HoldBlind Transfer Call TransferAttended Transfer Conference Call Key Call Features Call FeaturesConfiguration with Keypad Configuration GuideMenu Item Menu Functions Display 7 G-711u Display 9 codE rEL Menu Item Menu Functions Access the Web Configuration Menu Configuration with Web BrowserStatus Configuration MenuNAT End User Password IP Address Basic SettingsGrandstream Networks, Inc Status Basic Settings Advanced Settings Advanced SettingsDisable Call-Waiting Send Dtmf All Rights Reserved Grandstream Networks, Inc Grandstream Networks, Inc Grandstream Networks, Inc MWI Grandstream Networks, Inc Syslog level Grandstream Networks, Inc Saving the Configuration Changes Click to relogin Rebooting the Phone from RemoteConfiguration through a Central Server Upgrade through Http Software UpgradeUpgrade through Tftp Http//support.solarwinds.net/updates/New-customerFree.cfm Managing Firmware and Configuration File Download Firmware and Configuration File Prefix and PostfixStep Restore Factory Default SettingHeadset Connection Cross Over Cable For Plantronic Headset C d D c Glossary of Terms Dtmf DNSDid DSPHttp Echo CancellationFXS DhcpNTP IP TelephonyIVR MTUSDP PstnRtcp RTPVoIP UDPVAD Vlan
Top Page Image Contents