b) Adjusting the display contrast
If you have called the programming
mode, ...
2@ press the button repeatedly till the text "SET LCD CONTRAST" is displayed.
tpress the button to change set value according to your personal
preference.
2@ press the button again to confirm your choice and move on to another setting option.
c) Setting Date / Time
If your telecom provider is offering the feature "Caller ID", the time and the date (besides the year) are automatically set. If this is not the case, you can make the settings yourself:
If you have called the programming
mode, ...
2@ press the button repeatedly till the digits for the year start blinking.
t press the | button to change |
the set digits. | |
2@ press the | button repeatedly |
till the digits for the Month start | |
blinking. |
|
t press the | button to change |
the set digits. | |
2@ press the | button repeatedly till |
the digits for the Day start blinking. | |
t press the | button to change |
the set digits. | |
2@ press the | button repeatedly |
till the digits for the Hour start blinking.
tpress the button to change the set digits.
2@ press the button repeatedly till the digits for the Minutes start blinking.
tpress the button to change the set digits.
2@ And finally, press the button again to confirm your selection and to move on to the next setting option.
d) Setting the Local Code
If you set the prefix for your local network, it will be suppressed while displaying phone calls from the own local network.
If you have called the programming
mode ...
2@ Press the button repeatedly till the text "SET LOCAL CODE" is displayed and the first digits start blinking.
tPress to set the first digit.
2@ Press the button again till the next digit starts blinking..
tPress the buttons to change the next digit.
Repeat these steps for all the other digits , till your local dialling prefix is set. If you do not wish to set all the 5 digits, simply set the open digits to
2@ Press the button again to confirm your selection and to move on to the next setting option.
- 8 - |