e) Setting the dial tone code
Is your telephone connected to a PABX? If not, you can skip this item.
If, however, a dial tone needs to be requested first, you can set the dial tone code here. This will be automa- tically prefixed after selecting a call number from the memory by pres-
sing the 
button twice (see also Section 9f).
2@ Press the 
button repeatedly till the text "PREFIX" is displayed.
tPress 
to set the Local Code. In the display...
a short Flash pulse will be prefixed a short Earth pulse will be prefixed as Local Code
-no Local Code will be prefixed
or you can select any digit between 0...9 as Local Code (in most of the PABX in- stallation "0" is used as the Local Code.
2@ Press the 
button again to confirm your selection and to move on to the next setting option.
f)Setting duration for Flash pulse Various services such as Call Forwarding require a Flash pulse which you can initi- alise with the button R. In order that this will not be misinterpreted as "On hook", this pulse should not be too long, howe- ver, long enough to be identified as Flash pulse.
Ask your service provider or refer to the user manual for the PABX as to how long the Flash pulse should be. The factory setting is 100 ms and for most of the appliances this is sufficient.
2@ Press the 
button repeatedly till the text "FLASH TIME" is displayed:
tPress 
to change the setting. Select the value specified by your
service provider or your PABX.
2@ Press the 
button again to confirm your selection and to move on to the next setting option.
g) Selecting the ring tone
Using this function, you can select the desired ring tone from among 48 ring tones:
2)Press the 
button repeatedly or
the 
button till the desired ring tone is heard.
aTo save the change to terminate this
function, press the 
button twice or just wait for a few seconds.
When you press the button once the text "LINE IN USE" is displayed: If you press it again, the phone is again ready for operation.
h) Setting the ringer volume
Using this function, you can adjust the volume level for the ring tone set as above:
2)Press the 
button You can hear the set ring tone.
yPress the 
button repeatedly till the desired volume (Display:
"1"..."4") is set..
- 9 - |