Link electronic Door phone manual Changing name cards, Final closing of ID Doorphone

Page 7

2.3 Changing name cards

Name card panel (0on page 3) has spaces

to insert printed name cards. Insert name cards from top (see picture). Cards can easily be printed with pictures as well as text using the included software. The card outline is marked for easy cutting .

pocket

Panel with cards

2.4Final closing of ID Doorphone

2.4.1Covering control elements

1.Push aluminium speaker cover back up (see picture). Take care when re- covering the speaker. The aluminium edge of the speaker may be gently pressed if required.

2.4.2Replacing name card panel

2.Push key into hole in speaker grille as far as possible. (see figure -2).

3.Push name card panel upwards and push the bottom edge in (see figure - 3).

4.Push the name card panel back down behind the lip of the casing (see figure - 4).

Image 7

Contents Link Slim Door Phone Table for Easy Programming Basic description InstallationFeatures Opening, wiring, wall mounting and settingsUncover control elements Wiring and wall mountingVoice level SwitchesTRH Location of ID Doorphone componentsReplacing name card panel Changing name cardsFinal closing of ID Doorphone Covering control elementsTelephone Caller SlimDoorPhone ServicesSignalling Overview Visitor at the doorIncoming call Entering programming modeParameter programming Programming from a telephone by DtmfProgramming from a PC ID Manager program Parameter descriptionDirect Dialling Memories Relay Time parameters Parameter Value Description Default Exam.1 Exam.2 Xxxx=0 selects 2-Group mode, e=1 selects Day/Night mode Basic parameters15 ∗ Max. time sec between button presses rangeSystem setting Presetting and DeletingExit programming Overview of Parameters Parameter Value Description Default Exam.1 Exam.2 Nn…800ms Mechanical dimensionsTechnical parameters Electrical parameters204 Table for easy programmingDrilling master board