Interquartz 98583 manual Ringer pitch control, Volume slider, Tone / Pulse switch, Reset button

Page 11

Ringer pitch control

Located on the base of the unit ( see Figure 2 ). Rotating this knob alters the pitch of the ringing signal. Ideal where there is more than one phone in a room.

Volume slider

Adjusts the volume of the on-hook dial / handsfree speaker.

Tone / Pulse switch

Located on the base of the unit ( see Figure 2 ). Used to select the correct dialling mode, either TONE or PULSE. If you have any doubt about the system supplied to your phone, contact your Network Supplier and they will advise you.

Reset button

It is unlikely that you will need to use this button.

The button is located under the memory number overlay for the five, top, memory buttons, Figure 1. If the telephone appears not to function, for any reason, pressing this button will reset the telephone to normal operation.

Note : any stored memories will be lost and must be re-entered.

Image 11

Contents LCD Feature Phone Contents Telephone facilities Important NotesIntended use Declaration of ConformityAudible tones REN numberHandsfree speaking / On hook dialling Emergency callsBatteries InstallationConnection Setting the clockHandsfree button Telephone FeaturesLiquid crystal display LCD Memory buttons Mute buttonRedial On / Off hook button Clock / TimerStart / Stop Tone buttonStore button Ringer indicatorRinger volume switch Pause buttonRinger pitch control Volume sliderTone / Pulse switch Reset buttonOn hook dialling Operating InstructionsManual dialling Memory dialling Speakerphone diallingSpeed dialling Page Mixed dialling Cascade diallingRedialling Recall Pabx accessPabx and System Usage Voice Messaging Automatic pause insertionPage Maintenance and Problem Solving Warranty and Service BL9 6YA