Interquartz 98583 manual Operating Instructions, Manual dialling, On hook dialling

4. Operating Instructions

Manual dialling

Lift the handset, listen for the dial tone and then dial the required number using the keypad. The number called will appear on the LCD.

On hook dialling

In this mode, telephone calls can be made without lifting the handset and the progress of calls can be monitored. Once the calling party answers the phone you MUST either lift the handset or press the speakerphone button to conduct the conversation.

-Press on hook dial button and the dial tone will be heard in the monitor speaker.

-Dial the required number on the keypad

-Monitor the call's progress, through the speaker

-Lift the handset or press the speakerphone button when the called party answers the phone

-The call is terminated by replacing the handset or by pressing the speakerphone button.

In on-hook dialling mode the telephone will monitor the call progress. If the called party does not answer, then the telephone will automatically release the line after approximately 60 seconds. A warning tone, of two short beeps, sounds 5 seconds before line release and the calling time can be extended by pressing the pause button.

If you wish to terminate a busy call or a non-answered call, before the telephone does so automatically, simply press the off-hook button.

11