Interquartz IQ333 manual Headset Operation, Handsfree / Headset and Handset Modes

4. HEADSET OPERATION

This telephone can be configured to suit many different headsets - please consult the INSTALLATION section for details to get the best

performance from your headset.

(Warning: Only use NZ Telecom Telepermit Approved headsets with this telephone)

BASIC OPERATION

To receive or make a call using the headset:

(Please ensure that the headset is connected to the telephone correctly and that you are wearing the headset correctly)

●To receive calls simply press the HANDSFREE / HEADSET key and speak into the headset microphone. To hang-up press the

HANDSFREE / HEADSET key again.

●To make calls simply press the HANDSFREE / HEADSET key and you should hear the dial tone. Dial the number you are

calling either using a pre-stored memory key or dial using the keypad. To hang-up press the HANDSFREE / HEADSET key

again.

HANDSFREE / HEADSET AND HANDSET MODES

A call can be switched between the Handsfree / Headset mode and the Handset mode by pressing the HANDSFREE / HEADSET

KEY or by lifting the handset.

The HANDSFREE / HEADSET KEY has auto-detection function. When a headset is correctly connected to the telephone, the

Handsfree function is automatically disabled to allow the HANDSFREE / HEADSET KEY to work in Headset mode. You can unplug

the headset from the telephone to revert back to Handsfree mode (even during a call).

Lifting the handset during headset mode will change to handset mode operation. To revert back to headset mode operation from

handset mode simply press the HANDSFREE / HEADSET KEY and if appropriate replace the handset to the cradle.

11