MUTE KEY AND INDICATOR
When pressed, the Mute key cuts off transmission from the handset, handsfree and headset microphones to allow user privacy. The
red indicator on the Mute key will glow to indicate that the mute condition is active. Press the Mute key again to release the mute
condition. The red indicator on the key will stop glowing.
REDIAL / PAUSE KEY
Redial Function
Press to redial the last number previously dialled, provided that the last number dialled was 32 digits or less. Dialling more than 32
digits during one call will cause erasure of the entire number from the redial memory.
EXAMPLE: TO REDIAL LAST NUMBER
1.Lift HANDSET, or press HANDSFREE / HEADSET KEY
2.Press REDIAL.
Pause Function
The Pause function may be needed in a dialling sequence if your telephone is connected to any network where a pause is required
(e.g. between internal and external dial tones).
For manual dialling:
1.Lift HANDSET
2.Dial any digits required before the pause
3.Press PAUSE
4.Dial the remaining digits
For memory usage (storage procedure):
1.Lift HANDSET, or press HANDSFREE / HEADSET KEY
2.Press STORE
3.Dial digits required before dialling the pause e.g. number or line access code
8