To use the telephone in Silent Ringing mode:
1.Set the RINGER VOLUME SWITCH to the OFF position (signified by the square symbol without a bell symbol inside it
2.Put your headset on and wait for the next incoming call
3.When a call arrives, the MULTIFUNCTIONAL INDICATOR will flash and the operator will hear the ringing tone at a low level in
the headset
4.Press the HANDSFREE / HEADSET key to answer the call.
VOLUME CONTROL
To adjust the sound volume in the headset earpiece, press the up or down volume buttons located in the middle of the memory card.
5. ADVANCED NETWORK OPERATION
Where this telephone is used on an intelligent network such as a PABX or other networks such as Telecom Smartphone services,
Centrex or TelstraClear Gateway the following information may be useful.
PAUSE FUNCTION WHEN DIALLING
Depending on your telephone system, this may or may not be required. If in doubt, check with your system supplier or Interquartz
dealer, as failure to observe your system's requirements may lead to difficulty in making outgoing external calls. If you have
determined that a pause is required by your host system, please refer to the PAUSE Function section to ensure correct usage of the
PAUSE button.
13