To program or alter the contents of a protected Direct Access memory:
1.Remove the memory card paper insert below the top row of Direct Access memory keys to reveal the MEMORY PROTECTION SWITCH
2.Move the MEMORY PROTECTIONSWITCH to the
3.Press STORE; the display will show “STORE”
4.Press the Memory Key either once to store in a
5.Enter the telephone number and press STORE
6.Enter the name (name of the feature code) by using the Keypad and press STORE to confirm; the display will show “MEMORY STORED”
7.Move the MEMORY PROTECTION SWITCH to the “Protected” position as shown in Figure 4
8.Gently press the small RESET key next to the MEMORY PROTECTION SWITCH.
To dial from a Protected Direct Access Memory
Press the desired Memory Key either once to dial from its
STORE
CLEAR | M | ER |
| TI |
NP P
Reset-
Protected
DIRECTORY
CALLER
FIGURE 4 MEMORY PROTECTION SWITCH
25