To store a caller’s details in the Directory Memory from the Caller List
1.Press CALLER; the most recent incoming caller’s name and number will be displayed
2. Press Scroll 
or 
to select the number you want to save into the Directory Memory
3.Press STORE; the display will show “STORE”
4.Press DIRECTORY; and the display will show “ENTER NUMBER” below the telephone number
5.Press STORE to confirm. You can use the Cursor 
or 
to change number before saving
6.The display will show the caller’s name; use the Cursor 
or 
to edit the
name if necessary
7.Press STORE to confirm; the display will show “DIRECTORY STORED”.
To delete a Call from the Caller List or to delete the entire Caller List
1.Press CALLER and press Scroll 
or 
to find the entry you wish to delete
2.To erase the displayed call, press CLEAR twice in rapid succession; the display will show “ERASED”
3.To erase the entire Caller List, press CLEAR twice in rapid succession and hold the key down on the second depression; the display will show “HOLD TO CLR CALL”
4.To prevent entire directory erasure release the CLEAR key at this time before 6 seconds has elapsed; otherwise keep holding the key down and go to the next step
5.6 seconds from step 3 the directory will be deleted and the display will show “CALL MEM CLEAR”.
Note: See MEMORY OPERATION section for more details of storing and dialing operations using Direct Access and Direct Memories.
33