Interquartz IQ750 manual Date and Time SET UP Display, Date Setting

Page 9

DATE AND TIME SET UP DISPLAY

The best time to set up the Date and Time is during installation, as follows:

Upon installation the display will automatically show step by step prompts to guide you through the Date and Time setup procedure. This procedure can also be used at any time to change the time and date settings.

The following procedure assumes that all steps in the “General Setting Up” have been carried out.

TIMER

FIGURE 1A DATE SETTING

1.If the display is blank, lift the Handset briefly to wake up the telephone and replace the Handset in the cradle

2.For 10 seconds the display will show “20040101” and “DATE-YYYYMMDD” when the unit is first powered up

3.If the display is alive but not showing “20040101” and “DATE-YYYYMMDD”, press STORE, TIMER; the display will return to the “20040101” and “DATE-YYYYMMDD” mode. Proceed to step 4 within the next 10 seconds; repeat step 3 if necessary to re-enter Date/Time setting mode.

4.Enter Year (4 digits), Month (2 digits) and Date (2 digits)

TIMER

FIGURE 1B HOUR MODE SETTING

5.Hour Mode Setting - the display will now show “1-12HR 2-24HR”

6.Press 1 for 12 hour mode or 2 for 24 hour mode display (if 24 hour mode was chosen, please go to step 9)

9

Image 9
Contents Model IQ750 Caller ID Handsfree Headset Business TelephoneContents Memory Operation Illustrations Features Headset Savvy FeaturesCaller ID CLI Features General Functions Operating Requirements Liquid Crystal DisplayMessage Waiting General SETTING-UP Setting UPDisplay Brightness Adjustment UnpackingDate Setting Date and Time SET UP DisplayBasic Operation AM/PM SettingTOP View General Controls and IndicatorsRINGER/MESSAGE Waiting Indicator Ringer Volume SwitchRinger Pitch Control Cradle Switch Reset KEYVolume Slider ALPHA-NUMERIC KeypadMute KEY and Indicator Redial KEYPause Function Timer KEY and Automatic Call Timer Function HANDSFREE/HEADSET KEY and IndicatorTo use Handsfree mode To use Headset modeDisplay Icons and Fields Battery CompartmentNumber Field Name Field Outgoing calls using Handsfree manual or memory dialing Incoming calls using HandsfreeHandsfree Operation Changing from Handsfree to Handset during a callHints for Handsfree Operation TRAINEE/SUPERVISOR Mode Headset OperationHEADSET/HANDSET/HANDSFREE Modes Silent Ringing Alert Light SupportMemory Backup Direct Access Memory KeysMemory Operation Memory StorageTo store a Number and Name in a Direct Access memory Direct Access Memory CapacitySpeed-Dialling Storable Handsfree code Speed-Dialling and Automatic Hang-upDirect Access Memories and the Memory Protection Switch To dial from a Direct Access MemoryTo dial from a Protected Direct Access Memory Memory Protection SwitchDirectory Memory Directory Memory CapacityTo Store a Number and Name into a Directory Memory Last Number Redial Memory To dial from the Directory Memory using Name SearchTo edit an entry in the Directory Memory To delete an entry from Directory MemoryUsing the 5-Stack Last Number Redial Memory Using the Caller ID Display Caller List Call Waiting DisplayDisplay of a Typical Call from the Caller List Page Page Manually Resetting the Message Waiting Prompts Advanced Network OperationTalking Text SMS Messages Pause Function When Dialing OUT Automatic Trunk Access Digit InsertionAutomatic Pause Insertion Pause Time Holding and Transferring Calls Using the MemoriesSpeed Dialing Cascade Memory DialingInstallation LocationWall Mounting IQ235 Wall Mount Bracket Modular Wall Jack and Link Cord IQ235 Wall Mount Bracket BREAK-OFF Lugs Message Waiting Light Compatibility Headset MIC Adjust ControlTo Make a Headset MIC Level Adjustment Headset MIC Adjust Control and Polarity Switch Headset Polarity SwitchPage General Care and Maintenance CleaningFailure to Operate and Service Difficulties Thunderstorms Warranty 6 YearsService and Product Services International Quartz Limited