Interquartz manual Model IQ560E Features

Page 16

 

MODEL IQ560E FEATURES

CALL TIMER

See overleaf for more details

 

 

When a call is in progress, the word “TIMER” appears

 

STORE Button

on the display. When the call is terminated, the call

 

duration will be automatically displayed for 6 seconds.

 

Use to store memories. Any memory can store 24 digits with any combination of

 

 

numeric entries plus PAUSE, , and Recall (Flash) commands.

16 digit LCD Display

 

 

Displays Clock, Call Timer and number dialed.

 

PAUSE Key

 

 

 

 

Pause may be required if your phone is connected to any network where a 2

SET Key

 

second pause is needed during dialling. Lift the handset, dial any digits

Use to set the clock in 12-hour mode with PM indication

 

required before the pause, press Pause button, and dial remaining digits.

Hour (HR) and Minute (MIN) Keys

 

Ringer/Message Waiting Indicator

 

Flashes when the telephone rings with an incoming call.

Press SET key then HR and MIN keys to set the clock.

 

 

Built in message waiting suits both High Voltage (80 VDC) and Polarity Reversal

Press SET key again to complete the clock setting.

 

 

types. (Other system types are optional).

 

 

BACKSPACE Key

 

Memory Keys

Deletes the last digit of a telephone number during memory

 

Upper row of 5 memory keys has both one and two touch memories and can be

storage.

 

protected to prevent over-writing - network facility codes may be programmed

 

 

here for ease of use. Lower rows of 10 memory keys have one touch memories.

MUTE Button and Indicator

 

To store, lift HANDSET, press STORE, enter number, press Memory key and

 

hang up. See overleaf for explanation of one-touch and two-touch memories.

Press to cut off transmission from the Handset, Headset and

 

Handsfree microphone to allow user privacy. The red light

 

Reset button

indicates when the mute condition is active. Press MUTE

 

again to release the mute condition.

 

Press this button to reset the telephone to normal if the telephone appears to

 

 

be malfunctioning.

HANDSFREE button and indicator

 

The memories will not be erased when the button is pressed.

 

 

Press HANDSFREE to conduct a handsfree conversation. A

 

red indicator will glow. Press HANDSFREE again to turn it off.

RECALL Button

 

 

HEADSET button and indicator

 

For use with the host telephone system to invoke special network facilities such

 

as call hold or call-transfer which may be available in your PABX or network.

Press the Headset button to conduct a call in HEADSET

 

See your telephone system user guide to learn how to use it. May be called

mode. The indicator glows when the HEADSET mode is

 

"Flash" or "Facility" key.

activated.

 

Flash timing is preset to 100mS.

Ringer Volume switch (Hi/Low/Off)

 

 

Selection of OFF (no sound), LOW volume, and

 

 

HIGH volume of the telephone's ringing sound.

 

 

When the switch is set to OFF, the ringing sound can

 

 

still be heard via the headset if connected to

 

 

the headset port (headset optional extra).

 

Handsfree microphone

Located on the underside.

 

 

Reproduces your voice as you speak to the other party in HANDSFREE

 

 

Ringer Pitch Control

RINGER

mode. Keep clear of obstructions to enable clear reproduction of your voice.

PITCH

 

Rotate the control to adjust the ringer pitch.

 

REDIAL Key

Located on the telephone's base.

 

 

Press the button to redial the last number (max 32 digits).

 

Figure 1

 

 

 

 

To access a more detailed, downloadable user manual:

Handsfree volume slider

Earpiece volume slider

please visit our website at www.interquartz.com.au or www.telephones.com.au or

Adjusts the volume of sound from the speaker.

Adjusts the hearing level of the HANDSET / HEADSET.

call 1800 6 IQTEL (1800 647 835),

Located on the side of the telephone.

Set to midway for normal listening level.

send an email to enquiries@interquartz.com.au

 

Located on the side of the telephone.

 

 

16

17

Image 16
Contents Handsfree Headset Display Telephone Model IQ560EContents Quick Reference Guide Features Page General Controls and Indicators TOP ViewRINGER/MESSAGE Waiting Indicator Ringer HI/LO/OFF SwitchCradle Switch Ringer Pitch ControlEarpiece Volume Slider Handsfree Volume SliderRecall KEY Programming the ClockCall Timer Mute KEY and IndicatorSET KEY Hour KEYPause Function For manual dialingHandsfree KEY and Indicator Headset KEY and IndicatorData Port and Switch Handsfree Operation Using the Handsfree KEYHandsfree Microphone Outgoing calls using Handsfree manual or memory dialing Hints for Handsfree OperationClaria Alert Feature TRAINEE/SUPERVISOR ModeHeadset Operation HEADSET/HANDSET/HANDSFREE ModesTraining Mode Supervisor ModeSilent Ringing Feature To use the telephone in Silent Ringing modeModel IQ560E Features Using the Memories Pause Function When DialingAdvanced Network Operation Memory Feature Operation NON-VOLATILE Memories Battery Free Permanent StorageEeprom Memory Feature Storing a numberMemory Lock Cascade DialingDialing a number Installation General SETTING-UPUnpacking LocationWall Mount Bracket WALL-MOUNT Bracket Optional not Included with Phone Line Connection To Make a Headset MIC Level Adjustment Headset Polarity SwitchHandsfree MIC Adjust Control Page Shared Mode Data Port SwitchSplit Mode General Care and Maintenance CleaningThunderstorms Warranty 6 Years Service Centres 3C585001-03