Interquartz IQ560E Memory Feature Operation, NON-VOLATILE Memories Battery Free Permanent Storage

6. MEMORY FEATURE OPERATION

The telephone has 20 memories in total, distributed over 15 keys, to provide easy dialing of often-used numbers. The upper row of 5 memory keys has both one and two touch memories, and the lower rows of 10 memory keys each have a one touch memory (see Figure 5).

NON-VOLATILE MEMORIES (BATTERY FREE PERMANENT STORAGE)

Each memory can store 24 digits with any combination of numeric entries, PAUSE , , and Recall commands. Batteries are not required to back up the memories of the IQ560E. They will be permanently retained until overwritten by a new storage operation

for the user.

EEPROM MEMORY FEATURE

The IQ560E can be pre-set with user-selected codes for the 10 Memories accessible from the five Memory buttons located near the display (five ONE TOUCH and five TWO TOUCH memories). Any often-used or complex network numbers or network facility codes can be installed at the point of sale to eliminate the need to consult confusing system user guides. Custom-programming can enhance and simplify phone and network operation, thereby reducing the demands on staff training. The pre-programming can alter at a later stage to allow changes to be made - see the MEMORY LOCK section below.

Storing a number:

1.Lift HANDSET or press HANDSFREE or HEADSET,

2.Press STORE,

3.Enter the telephone number,

4.Press the desired MEMORY key either once for a “ONE TOUCH” memory (any memory button), or twice for a “TWO TOUCH” memory (only the top row near the display).

5.Replace HANDSET or press HANDSFREE or HEADSET.

19