HEADSET MIC ADJUST CONTROL
This control allows many different headsets on the Australian market to function correctly with the IQ560E telephone by adjusting the HEADSET’S Microphone sensitivity . The control is located on the underside of the telephone (see Figure 6). The adjustment can be made by a small screwdriver or similar implement that will fit into the control slot. Please see Table 1 as a guide to the correct settings for some popular headsets.
TO MAKE A HEADSET MIC LEVEL ADJUSTMENT :
With the headset connected as per the instructions in this manual:
1.Put the headset on and lift the HANDSET to your other ear and make an
2.Pressing the HEADSET key, swap between HANDSET and HEADSET mode (The indicator will illuminate when the HEADSET is in use) a few times while speaking to the other party
3.With the other party’s help decide if your voice level is the same when using the HANDSET and HEADSET.
4.If you sound too loud on the headset, adjust the microphone sensitivity (turn anti- clockwise) so that your voice level when using the HEADSET matches that of the HANDSET. Clockwise rotation increases the HEADSET mic output level. Please see Table 1 as a guide to the correct settings for some popular headsets.
HEADSET POLARITY SWITCH
Located on the underside of the telephone (see Figure 6), this switch provides compatibility with the two
Position ‘V’ suits Plantronics Vista Cords and other Headsets wired in the same configuration (also known as “reversed” wiring mode).
Position ‘P’ suits Plantronics P cords and other Headsets wired in the same configuration (also known as “normal” wiring mode).
Please see (Table 1) as a guide to the correct settings for most popular headsets.
25