Interquartz IQ560E manual Installation, Unpacking, General SETTING-UP, Location, Wall Mounting

7. INSTALLATION

UNPACKING

The carton contains the following:

•Telephone body and handpiece.

•Coiled handset cord and line cord.

•User Manual or Quick Start-up Gudie.

GENERAL SETTING-UP

1.Fit the COILED CORD to the appropriate sockets in the HANDSET and the telephone base – please do not connect it to the HEADSET socket located on the side.

2.Fit the LINE CORD to the rear socket and to your telephone network outlet.

3.Set the Ringer Volume and the Ringer Pitch controls.

4.See following sections to complete the installation.

LOCATION

The telephone should be placed on a desk, table or shelf where it is not likely to be pushed off. If the unit is to be wall-mounted, it should be seated securely on the WALL MOUNTING BRACKET (please order separately). Avoid excessive heat, damp, dust, direct sunlight, vibration, and other appliances or devices which may transmit or emit electrical or electromagnetic radio frequency noise or signals (e.g. computers, welders, pagers).

WALL MOUNTING

1.To enable the HANDSET to be supported in the cradle, follow the procedure shown in (Figure 4A) to reverse the HANDSET RETAINER

2.Fit the WALL MOUNT BRACKET (optional, not supplied) to the underside of the telephone and mount on the MODULAR WALL JACK (see Figure 4B).

3.During item 2 above, ensure that the link cord is connected as shown to the telephone and wall jack.

21