PI Manufacturing Internet Phone user manual Menu Setup Con’t, Pulse

Page 6

3.HOW TO SETUP (You can exit the setup menu anytime by pressing “MENU” key again.)

A.Menu Setup Con’t

Tone Setting: Default

Dial Type:

PULSE

Dialing Timeout: 6 Second

MAC Address: 00D0E90022E4

Version:

IP Phone V2.40

Menu

UPDATE CHANGES? <OK> OR <Cancel>

•Set the Tone among different country tone standard or different brand of PBX.

•Select the country or user define.

•Set the Dial Type of PSTN

•You could use <–, –> key to choose PULSE or DTMF

•The function enable when you don’t press any key after the period of time, it will automati- cally dial the number.

•Shows the MAC of the machine.

•shows the version of the firmware.

•When setup complete, press “menu” button again.

•Press <OK> to confirm and save the changes or press <Cancel> to canel all changes

Cancel

OK

*You can exit the setup menu anytime by pressing “MENU” key again.

NOTE.1: When setting up “ADSL Dialup” or PPPoE function set to “YES”

ADSL ID:• ID for ADSL Dialup (Internet User Name)

ADSL Password:

• Password for ADSL Dialup (Internet Password)

NOTE.2: When set up “Gatekeeper” function set to “YES”

Gatekeeper IP

--- . --- . --- . ---

Ext No (Use G/K)

GW Prefix(UseG/K)

•Set up Gatekeeper (GK) IP Address

•Gatekeeper IP will be supplied from PI and should be set to 4.38.32.22

•PI will preset Ext No (Extension No.) - Do Not Change This Extension No. act as your VoIP Phone number.

•Gateway prefix number can be set(*see warning) if you have already set up the Gatekeeper (GK) IP. Once Gateway (GW) prefix has been set, this IP Phone will register as a Gateway in the Gatekeeper. We do not suggest this function to be used and it should be set blank.

*WARNING: GW Prefix is the Identification or password to your VoIP Phone. By enabling this function, you will have access to VoIP Phone’s PSTN line. But, if someone else have your Prefix, they can access an outside line thru your VoIP Phone and may run up your telephone

bill. GW Prefix has a maximum of 16 digit number.

•PI GK (Gate Keeper) can not recognize Internal IP address (i.e. 192.168.XXX.XXX)

•If you have to use any IP Sharing (Router), VoIP Phone must be installed in front of Router.

•You can connect Router’s WAN port to VoIP Phone’s PC Port for IP Sharing.

Internet

Router’s WAN Port

• LAN IN

• PC OUT

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Voice Over IP Ii. Package Contents IndexVoIP Phone Diagram User NameGatekeeper ID Pstn Gatekeeper ServiceIntroduction PSTNVoIPVoIPPSTN InternetName USA01 Dhcp Adsl DialupMenu Setup Con’t PulseVolume HOW to SET UP B. Speed DialVolume Adjustment Hold MutePhone Book SAVE?DAM Setting EnableDAM Digital Answering Machine DAM/MESSAGE LAN IP SHARE/NAT PC ComputerIP Share NAT PC OUTRouter Setting Cable/DSL ISP Settings First, please setup your Router enable static IP OnNAT Setting on VoIP Phone Router Internet Router’s IP SHARE/NAT RouterBusy Tone Setting Call ForwardGATEWAY/PHONE Mode Pstn InternetLanguage Selection Language FuncEnglish301 164615 Default User Name User Default Password User HOW to SET UP VoIP Phone Thru BrowserWEB Browser Configuration Other VoIP Phone’s IP Address These should be static IPsPlease do not change setting On this Advenced SettingQuick Dial Setting Example Dial 0 5551234 #HOW to USE VoIP Phone PstnVoIP extension or GW Prefix Making a Phone Call to Another Voip Phone Setup Diagram B Setup DiagramSetup Diagram a RouterAbbreviations Vpnvpn PC PC PC PCRouterRouter CABLE/DSLCABLE/DSLStatic IP Quick Setup Adsl Dialup noUser Name Dynamic IP Quick Setup IP Share NAT 0 IP Address 0Adsl Dialup YES Adsl ID Adsl PPPoE Quick SetupPassword Ext No Use G/K MenuTo the conditions below Label
Top Page Image Contents