ENFORCER VIDEO DOOR PHONE
Operating Instructions (cont):
Monitoring the entrance:
1. To see and hear what is going on at the
entrance, lift the handset and press theCamera Button Camera Button. The camera and monitor will
automatically switch on.
2.If the optional additional camera is installed, pressing the Camera Button a second time will switch the image displayed on the monitor to the view from the other camera. Pressing the camera button again will turn off the cameras.
3. When finished, simply hang up the handset and the camera will switch off. If the handset is not hung up, the camera will automatically switch off after 2 minutes.
LED Indicator: | LED Indicator |
| |
|
| Green LED – Solid green LED | |
A status LED indicator is located on |
| indicates standby mode. Flashing | |
the front of the monitor. The LED |
| green LED indicates camera “on”. | |
| (2 monitors only) | ||
displays power information as well as | |||
| |||
the status of the handset. |
| Red LED – Solid red LED indicates | |
|
| standby mode. Flashing red LED | |
|
| indicates camera “on”. | |
Dimensions:
ENFORCER® |
|
|
|
95/8 |
| ||
|
| 51/4 | |
| (245mm) |
| (134mm) |
|
|
| |
|
|
|
|
ENFORCER
711/16
(196mm)
31/8
(79mm)
315/16
(100mm)
11/2
(38mm)
8 |