Switching the projector on/off
Power indicator
Power indicator informs you the status of the power.
When the TEMP indicator is flashing, the power indicator will not light.
Power indicator
Basic Operation
Indicator status | Status | ||
|
|
| |
No illumination or flashing | The MAIN POWER button is switched off. | ||
|
|
| |
Red | Lit | The MAIN POWER button is switched on and the projector is in standby mode. | |
|
|
| |
Green | Flashing | The power button is switched on and the projector is getting ready to project. | |
|
| ||
Lit | Projecting. | ||
| |||
|
|
| |
| Lit | The power button is switched off and the projector is cooling the lamp. | |
Orange |
|
| |
Flashing | The power button is switched on again when cooling the lamp and recovering to | ||
| |||
| projection mode. Recovery may take a while. | ||
|
| ||
|
|
| |
NOTE:
•See “TEMP indicator” on page 45.
•While the projector is cooling the lamp, do not switch the MAIN POWER button off or unplug the mains lead.
•The electric consumption in standby mode is 0.08 W.
