Ceiling mount bracket safeguards | Panasonic PT-AE3000E instruction

Technical Information

Ceiling mount bracket safeguards

The projector and the ceiling mount bracket are designed for sufficiently safety however, make sure the safety cable provided with the projector is installed and attached to the bottom of the projector when mounting on the ceiling for safety and security.

NOTE:

•Even if it is during guarantee period, the manufacturer is not responsible for any hazard or damage caused by using a ceiling mount bracket which is not purchased from an authorised distributors, or environmental conditions.

•Make sure to use a torque driver and do not use an electrical screwdriver or an impact screwdriver.

•Installation work of the ceiling mount bracket should only be carried by a qualified technician.

•Remove an unused ceiling mount bracket promptly.

Installing the safety cable

1.Install the ceiling mount bracket according to the Installation Instructions.

2.Loop the security cable around the ceiling mount bracket with less slack.

Lace the cable of the end with a latch through the loop on the other end of the cable.

Loop twice

Loop once

* Indicated above is ET-PKE1000S.

* Indicated above is ET-PKE2000

3.Attach the latch on to the bottom of the projector with a provided screw. Torque: 1.25±0.2 N·m

Appendix

56 - ENGLISH

Image 56

Panasonic PT-AE3000E manual Ceiling mount bracket safeguards, Installing the safety cable, Loop twice Loop once

Contents

Operating Instructions Important Safety Notice For business users in the European UnionThis Apparatus Must be Earthed To rain or moisture Important Safety Notice Important the Moulded Plug U.K. only Contents Contents Menu NavigationPicture menu Lens Control Precautions with regard to safety Do not look into the lens while the projector is being used Precautions with regard to safetyDo not set up the projector outdoors Remove the used batteries from the remote control promptly Do not put your weight on this projectorUse only the specified batteries Do not mix old and new batteries Projector may be subject to electromagnetic interference Order to get the best picture qualityDo not touch the surfaces of the lens with your bare hands Liquid crystal panel Accessories Remote control for Safety cable Lens coverPT-AE3000E TTRA0141 Mains lead for UK Remote control About Your Projector Top and front view Projector bodyAbout Your Projector About Your Projector Back and bottom view ComputerHdmi Component Screen size and throw distance Setting upCalculation methods for screen dimensions Front leg adjusters and throwing angle Setting upProjection method Mounting on the ceiling and projecting from front Adjusting the lens shift dials Lens shift and positioningHorizontal shift Vertical shift Setting up Projector location range When the screen position is fixedWhen the projector position is fixed 100% 40% Before connecting to the projector Connecting example Component IN/S-VIDEOConnecting example Hdmi IN/COMPUTER Connections Switching the projector on/off ConnectingMains lead Connect the mains lead to a mains socket Power indicator informs you the status of the power Power indicatorSwitching the projector on/off Press I to select OK and press the power or Enter button Switching on the projectorSwitching off the projector Selecting the input signal Switch on the connected devicesAdjust the focus and the projected image size Projecting an image Remote control operation Managing the lens control settingsSwitching the picture mode Adjusting the image Loading a saved setting Switching the aspect ratioAdjusting the signal condition with a waveform Remote control operation Adjustment example Adjusting with luminance optionsAdjusting with RGB options Contrast G/CONTRAST B Setting your own colour profile Adjusting the selected colourCreate a new profile Managing stored logs Saving a log setting as a profile Deleting the saved profilesChanging the profile names Loading saved profiles Resetting to the factory default settings Switching the input signalUsing the assigned function as shortcut Capturing an image Adjusting with the bar scale items Menu NavigationNavigating through the Menu Displaying the main menu Main menu and sub-menu Menu Navigation Language Lens Control Picture menu Colour Temperature Split AdjustDynamic Iris Waveform Monitor Adjusting the image in a split window NR Noise Reduction Colour Signal Mode Memory SaveMemory Load Memory Edit Clock Phase Position menuPosition DOT Clock Component signals Position menu Aspect ratio options and projection exampleZoom FIT Auto Setup WSSOver Scan Keystone Adjust ZOOM/FOCUS, H-AREA Position ZOOM/FOCUSLens Memory Load Lens Memory Save Lens Memory Edit You can edit named lens memory settingsRename the lens memory setting Underlined item is factory default setting ButtonBlank function Assignable functions Option menu Installation High Altitude ModeLamp Power Sleep Temp and Lamp Indicators Managing the indicated problemsLamp indicator Temp indicator Care and Replacement Cleaning the projector Care and Replacement When to replace the lamp unitReplacing the lamp unit Before replacing the lamp unit Attaching the top cover Care and Replacement Removing and replacing the lamp unitResetting the Lamp Runtime Troubleshooting List of compatible signals Technical InformationQuality *2 Dots *1 MHz KHz Serial terminal Technical Information Communication settings Control commands Inquiry commands Specifications Video ComputerComponent Hdmi Loop twice Loop once Ceiling mount bracket safeguardsInstalling the safety cable Unit mm DimensionsTrademark acknowledgements Index Indicator status Remote control button IndexMain menu Control panel button