Panasonic PT-AE3000E manual Picture menu

PICTURE menu

Remote control Control panel

See “Navigating through the MENU” on page 29. See “Main menu and sub-menu” on page 30.

CONTRAST

You can adjust the contrast of the projected image. Adjust the BRIGHTNESS in advance if necessary.

LowerHigher

Setting range: -64 to +64

Settings

PICTURE MODE

Depending on the projection environment, you can use these preset parameter settings to optimise image projection. Press I H to cycle through the options.

NORMAL CINEMA3

DYNAMIC

		CINEMA2
COLOUR1
COLOUR2		CINEMA1
	Setting for a general image, such
NORMAL	as sports programme or TV
	games
DYNAMIC	Bright and sharp setting
	Setting for HDTV standard in ITU-
COLOUR1	R BT. 709 and colour temperature
	6 500 K at the default setting of
	the PICTURE menu items.
	Setting for DCDM standard
	(SMPTE431-2) and colour
COLOUR2	temperature 6 300 K at the
	default setting of the PICTURE
	menu items.
CINEMA1	Setting tuned by top Hollywood
	colourists
CINEMA2	Deeper and more rich colour
	setting
CINEMA3	Vivid and crisp colour setting

NOTE:

•It may take for a while until the selected mode is stabilised.

BRIGHTNESS

You can adjust the brightness of the projected image.

DarkerBrighter

Setting range: -32 to +32

COLOUR

You can adjust the colour saturation of the projected image.

Lighter Darker

Setting range: -32 to +32

When COMPUTER signal is connected, only available

with the following signals.
1 125	(1 080)/60i	1 125	(1 080)/50i
1 125	(1 080)/60p	1 125	(1 080)/50p

TINT

You can adjust the skin tone in the projected image.

More More

reddish greenish

Setting range: -32 to +32

When COMPUTER signal is connected, only available with the following signals.

1 125	(1	080)/60i	1 125	(1	080)/50i
1 125	(1	080)/60p	1 125	(1	080)/50p

SHARPNESS

You can adjust the sharpness of the projected image.

Less	More
sharp	sharp

Setting range will vary according to the selected input signal.

32 - ENGLISH