Switching the projector on/off
Mains lead
Connecting | Disconnecting |
1.Make sure the shape of the mains plug and the AC IN terminal on the back of the projector match, then push the plug all the way in.
1.Unplug the mains lead from the mains socket.
2.Depress the latch and slide the cover off.
2.Align the side of the power cord secure lock with the side guide rail of the AC IN terminal of the projector and slide it in.
Rail guide
3.Place the latch to the latch catcher and press until it clicks.
Latch
3.Slide the power cord secure lock up along the side guide rail and remove.
Rail guide
4.Hold the plug and unplug the mains lead from the AC IN terminal on the back of the projector.
Latch 
4. Connect the mains lead to a mains socket.
NOTE:
•Do not use other than the provided mains lead.
•Ensure all the input devices are connected and turned off before connecting the mains lead.
•Do not force the connector as this may damage the projector and/or the mains lead.
•Dirt or dust
•Switch off the power to the projector when not in use.
Basic Operation
ENGLISH - 19
