Headset/ Dataport Operation
Using a Headset with your Telephone
The Model 480 is equipped with a switch and a 3.5mm jack on the left hand side of the phone for headset use.
In order to use a headset, the headset switch must be in the "on" position (position "1") and the handset must be off hook (away from the phone cradle).
Note: The handset will not function if a headset or headset adap- tor is plugged into the head- set jack and the headset switch is in the "on" position (position "1").
To make calls using a headset
1.Ensure the headset switch is in the on position
2.Plug the headset into the jack
3.Remove the handset from the phone cradle to obtain dialtone
4.Dial the number
To end a call, return the handset to the phone cradle.
To receive calls using a headset
1.Ensure the headset switch is in the on position
2.Plug the headset into the jack
3.When an incoming call is received, remove the handset from the cradle to answer the call
4.Complete the call using the headset
To end a call, return the handset to the phone cradle.
Contact your telephone equipment retailer or distributor to purchase a headset. Customers should read and observe all safety recommendations contained in headset operating guides when using any headset.
Using the Dataport
Located on the right hand side of the Model 480, the dataport can be used to connect another device such as a fax machine or computer modem to the phone. Plug one end of a line cord to the phone and the other end to the device to be connected.
Note: The dataport will only oper- ate when the handset is on hook (in the phone base cra- dle).
Headset/ Dataport Operation
Model 480 User Guide 13