3Com 900-0368-01 manual Gathering Site, Information

10CHAPTER 1: PRE-INSTALLATION

Figure 1 Network diagram - single server

Conference server pool

Conference server

Presence server

Master database

User database

Web server

		NBX server
Post-installation
	After you run the installation script, you need to configure the following:
Setup	Setting up a Route to the Conference Servers
	You must configure the NBX dial plan with a route to your conference
	server. If your implementation has only one server, then a route to a
	single endpoint is required.
	Setting up a Route to the Conference Attendant Servers
	As with the conference server, it is necessary to configure a route for the
	conference attendant server. The NBX dial plan is used for this purpose.
	Test E-Mail Notification Setup
	You must test the e-mail setup by logging in to the system and sending
	an e-mail message using Send-only Simple Mail Transfer Protocol (sSMTP).
	If you fail to receive the test e-mail message, you can check for errors in
	/opt/logs/vcx-linux/maillog.
Gathering Site	The 3Com NBX servers communicate with each other using IP addresses.
Information	These addresses must be dedicated (static) and must be compatible with
	your network design.