3Com 900-0368-01 manual 10.20.30.60

Single Server Initial Installation 19

---------- Configuring Hostname ----------

Enter system hostname [localhost] : conf01.yourcompany.com

---------- Configuring IP Interface 'eth0' ----------
Enter IP Address	[192.168.1.100	] : 10.20.30.60
Enter Network Subnet Mask	[255.255.255.0	] : 255.255.255.0
Enter Default Gateway Address [10.20.30.254		] : 10.20.30.254
---------- Configuring IP Interface 'eth1' ----------
Interface State	: disabled

Note that ‘eth1’ is not used for the 3Com IP Conferencing Module.

---------- Configuring DNS Servers ----------

Enter DNS servers one at a time.

When done, enter 0.0.0.0 to stop.

Primary DNS Server	[192.168.1.1] : 10.25.10.31
Secondary DNS Server	[192.168.1.2] : 10.26.10.31
Tertiary DNS Server	[0.0.0.0] : 0.0.0.0
---------- Configuring DNS Search Path ----------
Press Enter to leave	the current path unchanged, or specify
a new search path, with spaces separating each entry.

DNS Search Path []: yourcompany.com

---------- Configuring Network Time Protocol ----------

Enter NTP servers one at a time.

When done, enter 0.0.0.0 to stop.

Primary NTP Server [192.168.1.253] : 10.35.10.51

Secondary NTP Server [192.168.1.252] : 10.36.10.51

Additional NTP Server : 10.1.0.3

-------------------------- Configuring Time Zone --------------------------

Please select a geographic location from the following list:

1.Africa

2.Americas

3.Antarctica

4.Arctic Ocean

5.Asia

6.Atlantic Ocean

7.Australia

8.Europe