3Com 900-0368-01 Post Installation, End of IP Conferencing Module Configuration, Set up Routes

34CHAPTER 2: INSTALLATION SCRIPTS

Starting vcx/sippeng: [ OK ]

Starting vcx/vcxdb: [ OK ]

Started VCX Services: 5 started. -bash-2.05b#

End of IP Conferencing Module Configuration

Following successful completion of the script, the 3Com IP Conferencing Module services will be installed. Start the services using a script command, shell command, or web interface selection (as noted above).

Post Installation	Before the 3Com IP Conferencing Module can be used, the system must
Configuration	be configured to work with it. The following items must be set up:
	■ Create Routes to the:
	■	Conference Server
	■	Conference Attendant
	■ Add Trusted SIP Interfaces
	■ Configure the IP Conferencing Module
	■ Test the E-mail Notification Setup.
Set up Routes	You must program the NBX dial plan with routes to the conference server
	and the conference attendant server.

For information on how to program the NBX dial plan, see the 3Com NBX

Administrator’s Guide.

To create routes to the conference server/conference attendant server:

1Using a browser, log in to the NBX system as admin (default password is besgroup).

2Program the digit sequence for conferences. For example, to program the range 8000 to 8999, enter:

Command	ID	Entry	Digit	Min	Max	Class	Priority	Route
TableEntry Create	1	32	8	4	4	Internal	0	8