3Com 900-0368-01 manual Worksheet, Network Configuration Parameters

Page 11

Worksheet 11

One or more 3Com IP Conferencing Module servers may be added to a system.

Using DNS 3Com recommends that you configure your DNS servers so that they know the IP addresses of all NBX servers and gateways. If you prefer to not use DNS, you can edit the /etc/hosts files on the IP Conferencing Module and all of the NBX servers.

3Com does not support NIS or WINS as domain name resolution methods for NBX products.

Single Server You require the following:

You must dedicate one IP address to the 3Com IP Conferencing Module.

 

You must assign a host name to the 3Com IP Conferencing Module.

 

 

You must know the IP address of the network gateway.

 

 

You must know the IP addresses of the primary and secondary DNS

 

 

servers.

 

 

 

You must know the IP addresses of the primary and secondary NTP

 

 

servers.

 

 

 

 

 

Worksheet

To make it easier to configure your system, you may want to have the

 

 

necessary information in front of you before you begin to install any

 

 

server.

 

 

 

Table 3 Network Configuration Parameters

 

 

 

 

 

 

 

Configuration Parameter

Value

 

3Com IP Conferencing Module IP address (eth0)

3Com IP Conferencing Module host name

Subnetwork mask

Gateway IP address

Primary DNS server IP address

Secondary DNS server IP address

DNS search path

Primary NTP server IP address

Secondary NTP server IP address

Image 11
Contents IP Conferencing Module Installation Guide 3Com Corporation 350 Campus Drive Marlborough, MA Contents Index Conventions About this GuideComments RelatedDocumentation Example IP Conferencing Module Installation Guide System ReleaseAbout this Guide Overview ConfigurationInformation Gathering SiteWorksheet Network Configuration ParametersSystem Configuration Parameters Mail Notification Parameters PRE-INSTALLATION IP Conferencing Module ComponentsNBX system does not support presence Single Server Configuration Configuration installation GuidelinesSingle Server Initial InstallationEnter setup at the command prompt Start of Network Configuration10.20.30.60 Indian Ocean Pacific Ocean Enter continent Start of System Configuration End of Network ConfigurationConfirm your selection by typing y Select 1 to install the following componentsStart of E-mail sSMTP Configuration End of System ConfigurationEnter the host name of your computer handling outgoing mail Specify how sSMTP handles the From line of outgoing mailEnter the system user e-mail address End of E-mail sSMTP ConfigurationStart of Database Configuration Enter the mail name of your systemStart of IP Conferencing Module Configuration End of Database ConfigurationSingle Server Initial Installation Enter the prefix for group calls Enter the maximum value for numeric conference namesEnter the prefix for ad hoc conferences Single Server Initial Installation Installation Scripts Single Server Initial Installation Enter the username for NBX database synchronization Single Server Initial Installation Administrator’s Guide Post InstallationEnd of IP Conferencing Module Configuration Set up RoutesClick SIP Applications Trusted SIP Interfaces Click SIP Applications 3Com IP Conferencing Module Post Installation Configuration Dial Plan and 3Com IP Conferencing Module Configuration Notification Setup 3Com Public IP Conferencing Module ConfigurationStart of install-upgrade Script UpgradeEnter ./install-upgradeat the command prompt Upgrade Installation Installation Scripts Start of vcx-switchversion Script End of install-upgrade ScriptGeneration of activation keys Installed. Then do the followingSelect Admin System Config from the menu bar New activation keys license keysHost ID is displayed. For example 3157ecf668ffcb7dc7f00e4c Installation Scripts Purchase ServicesRegister Your ProductDownloads Access SoftwareTroubleshoot OnlineContact Us Latsupportanc@3com.com Index Index