VTech Amplified Phone manual Charge, Manual for further instruction

Page 40

Troubleshooting

Problem

Suggestion

 

 

The battery does not

• Make sure the handset is placed in the telephone base correctly.. The CHARGE light on the

charge in the handset

telephone base should be on..

or the handset battery

• If the cordless handset is in the telephone base but the CHARGE light is not on, refer to The

does not accept

charge light is off in this section..

charge..

• It may be necessary to purchase a new battery.. Please refer to the Batteries section of this

 

user’s manual..

 

• The telephone might be malfunctioning.. Please refer to the Warranty section of this user’s

 

manual for further instruction..

 

 

The CHARGE light

• Clean the charging contacts on the cordless handset(s) and telephone base each month

is off..

using a pencil eraser or a dry non-abrasive fabric..

 

• Make sure the power adapter and telephone line cords are plugged in correctly and securely..

 

• Unplug the power adapter.. Wait for 15 seconds before plugging it back in.. Allow up to one

 

minute for the cordless handset and telephone base to reset..

 

• The telephone might be malfunctioning.. Please refer to the Warranty section of this user’s

 

manual for further instruction..

 

 

www.vtechphones.com

37

Additional information

Page 39 Page 41
Image 40
Page 39 Page 41
Contents Table of contents Battery care and performance Replacing the handset battery Need HELP? Battery User’s manual Parts checklistBefore you begin Installation Connect power and telephone line cordsInstall handset battery Choose locationWall mounting bracket installation optional Desk/table bracket installationBelt clip optional If you subscribe to DSL serviceTo attach To remove Charge the handset battery Set the dial modeCheck for dial tone LanguageSet handset date and time Set ringer volumeHandset ringer style Telephone operation Handset layoutChan channel Prog programAnnc announcement Telephone base layout19 20 21 22 Handset operation Press any key to answer a call except OFF, orSelect Increase/decrease speaker volume Telephone base operationSet the answering machine to answer an incoming call Delete one or all messagesTemporary tone dialing Headset jackOperating range Directory Store a directory entryEdit a directory entry Erase a directory entry Move a directory entry to the speed dialDial a directory number Speed dial Store a speed dial entryEdit a speed dial entry Dial a speed dial number Delete a speed dial entryReassign locations in speed dial Caller ID About call history caller ID Review call historyDelete records from call history Dial a displayed numberStore a call history record in the directory Locate the record in call history that you want to dialDisplay screen messages Other party is blocking name and/or numberInformation About this caller’s name and/or numberAudible indicators Setting the clockAnswering system operation About announcementsAnswering system layout Record your announcementReview your announcement Delete your announcementAnswering system setup Feature summaryListen to, save & delete messages Call screening/interceptRecord a memo Delete messagesMessage window To stop recording, press PLAY/STOPIndicates volume level selected when pressing the volume Shows the current remote access codeDisplay when any setting is changed from on or off System is in programming mode or initializingRemote access commands Remote accessVoice menu Access code, then press 0 to turn the answering system on Delete messageMenu announcement to delete all old messages End call PressBattery needs to be recharged Displays when telephone base power is offDisplays when an out-of-range dial fails to Battery level is very low, handset operationsBattery care and performance BatteriesTroubleshooting Place the handset in the telephone base for rechargingCharge Minute for the cordless handset and telephone base to resetManual for further instruction Charge / Troubleshooting Dial mode Using the telephoneCannot dial out First, try all the above suggestions Before dialingAm using My caller ID features Caller ID serviceCall waiting Caller ID service System does notAnswering system Answering system are Call after four minutes IncompleteCall Disconnects the callRemote commands When dialingSystem Handset and the telephone base to synchronizeCommon cure for Or store from the call logMaintenance Limited WarrantyHow do you get warranty service? Important safety instructions FCC, Acta and IC regulations FCC PartRbrc seal Industry CanadaTechnical specifications Index About announcements 26 About call historyPage 91-000913-040-100 User’s manual

Amplified Phone specifications

The VTech Amplified Phone is designed to enhance communication for those who are hard of hearing or anyone seeking clearer audio. This innovative phone combines advanced technology with user-friendly features to provide an exceptional telecommunication experience.

One of the standout characteristics of the VTech Amplified Phone is its significant volume amplification capability. Users can adjust the receiver volume to a maximum of 50 decibels, allowing for a more comfortable listening experience. This level of amplification ensures that even the softest spoken words can be heard clearly. Additionally, the phone is equipped with digital sound processing to eliminate background noise, ensuring that conversations remain crisp and easy to understand.

The phone features large, backlit buttons, making it easier for users with visual impairments to dial numbers without confusion. These buttons are designed to be responsive and tactile, allowing for quicker access during calls. Furthermore, the phone's bright visual ringer ensures users will be alerted to incoming calls, even in noisy environments.

Another essential feature is the built-in speakerphone, which enables hands-free communication. This is particularly beneficial for users who may have difficulty holding a phone up to their ear. With clear, amplified audio on the speaker, users can engage in conversations without straining their hearing.

The VTech Amplified Phone is also equipped with a handy caller ID function. This feature displays the name and number of incoming calls on the large, easy-to-read screen, allowing users to identify calls before answering. In addition, the phone has a memory function that enables users to store frequently dialed numbers, enhancing convenience and accessibility.

Designed with versatility in mind, the VTech Amplified Phone is compatible with hearing aids, providing an added layer of convenience for users who rely on such devices. Its robust design ensures durability, making it a suitable choice for households or individuals looking for a reliable communication tool.

In summary, the VTech Amplified Phone merges cutting-edge technology with thoughtful design, making it an ideal choice for those seeking clarity and ease in their telephone communications. With features like high volume amplification, noise reduction, large buttons, and compatibility with hearing aids, it stands out as a top option for users needing enhanced auditory support.
Top Page Image Contents