VTech Amplified Phone manual Answering system are Call after four minutes Incomplete

Page 46

Troubleshooting

Problem

Suggestion

The answering system

•

Make sure the answering system is on.. When the answering system is on, the red light on the

does not answer after

 

ANSWER ON/OFF key should be lit..

the correct number of

•

If toll saver is activated, the number of rings changes to two when there are new messages

rings..

 

waiting (see page 28)..

•If the memory is full or if the answering system is off, the system will answer after ten rings..

•In some cases, the answering system may be affected by the ringing system used by the local telephone company..

The announcement

• When recording the announcement, make sure you speak in a normal tone of voice about nine

message is not clear..

inches from the telephone base..

 

• Make sure there is no background noise (television, music, traffic, etc.) when recording.

 

 

The answering system

• Make sure the answering system is on..

does not record

 

message..

 

The messages on the

• If a caller leaves a very long message, part of it may be lost when the system disconnects the

answering system are

call after four minutes..

incomplete..

• If the caller pauses for more than seven seconds, the system stops recording and disconnects

 

the call..

 

• If the memory on the system becomes full during a message, the system stops recording and

 

disconnects the call..

 

• If the caller’s voice is very soft, the system may stop recording and disconnect the call..

www.vtechphones.com

43

Additional information

Page 45 Page 47
Image 46
Page 45 Page 47
Contents Table of contents Battery care and performance Replacing the handset battery Need HELP? Battery User’s manual Parts checklistBefore you begin Installation Connect power and telephone line cordsInstall handset battery Choose locationWall mounting bracket installation optional Desk/table bracket installationBelt clip optional If you subscribe to DSL serviceTo attach To remove Check for dial tone Charge the handset batterySet the dial mode LanguageSet handset date and time Set ringer volumeHandset ringer style Chan channel Telephone operationHandset layout Prog programAnnc announcement Telephone base layout19 20 21 22 Handset operation Press any key to answer a call except OFF, orSelect Set the answering machine to answer an incoming call Increase/decrease speaker volumeTelephone base operation Delete one or all messagesTemporary tone dialing Headset jackOperating range Directory Store a directory entryEdit a directory entry Erase a directory entry Move a directory entry to the speed dialDial a directory number Speed dial Store a speed dial entryEdit a speed dial entry Dial a speed dial number Delete a speed dial entryReassign locations in speed dial Caller ID About call history caller ID Review call historyStore a call history record in the directory Delete records from call historyDial a displayed number Locate the record in call history that you want to dialInformation Display screen messagesOther party is blocking name and/or number About this caller’s name and/or numberAnswering system operation Audible indicatorsSetting the clock About announcementsReview your announcement Answering system layoutRecord your announcement Delete your announcementAnswering system setup Feature summaryListen to, save & delete messages Call screening/interceptMessage window Record a memoDelete messages To stop recording, press PLAY/STOPDisplay when any setting is changed from on or off Indicates volume level selected when pressing the volumeShows the current remote access code System is in programming mode or initializingRemote access commands Remote accessVoice menu Menu announcement to delete all old messages Access code, then press 0 to turn the answering system onDelete message End call PressDisplays when an out-of-range dial fails to Battery needs to be rechargedDisplays when telephone base power is off Battery level is very low, handset operationsBattery care and performance BatteriesTroubleshooting Place the handset in the telephone base for rechargingCharge Minute for the cordless handset and telephone base to resetManual for further instruction Charge / Troubleshooting Cannot dial out First, try all the above suggestions Dial modeUsing the telephone Before dialingAm using Call waiting Caller ID service My caller ID featuresCaller ID service System does notCall Answering systemAnswering system are Call after four minutes Incomplete Disconnects the callSystem Remote commandsWhen dialing Handset and the telephone base to synchronizeCommon cure for Or store from the call logMaintenance Limited WarrantyHow do you get warranty service? Important safety instructions FCC, Acta and IC regulations FCC PartRbrc seal Industry CanadaTechnical specifications Index About announcements 26 About call historyPage 91-000913-040-100 User’s manual

Amplified Phone specifications

The VTech Amplified Phone is designed to enhance communication for those who are hard of hearing or anyone seeking clearer audio. This innovative phone combines advanced technology with user-friendly features to provide an exceptional telecommunication experience.

One of the standout characteristics of the VTech Amplified Phone is its significant volume amplification capability. Users can adjust the receiver volume to a maximum of 50 decibels, allowing for a more comfortable listening experience. This level of amplification ensures that even the softest spoken words can be heard clearly. Additionally, the phone is equipped with digital sound processing to eliminate background noise, ensuring that conversations remain crisp and easy to understand.

The phone features large, backlit buttons, making it easier for users with visual impairments to dial numbers without confusion. These buttons are designed to be responsive and tactile, allowing for quicker access during calls. Furthermore, the phone's bright visual ringer ensures users will be alerted to incoming calls, even in noisy environments.

Another essential feature is the built-in speakerphone, which enables hands-free communication. This is particularly beneficial for users who may have difficulty holding a phone up to their ear. With clear, amplified audio on the speaker, users can engage in conversations without straining their hearing.

The VTech Amplified Phone is also equipped with a handy caller ID function. This feature displays the name and number of incoming calls on the large, easy-to-read screen, allowing users to identify calls before answering. In addition, the phone has a memory function that enables users to store frequently dialed numbers, enhancing convenience and accessibility.

Designed with versatility in mind, the VTech Amplified Phone is compatible with hearing aids, providing an added layer of convenience for users who rely on such devices. Its robust design ensures durability, making it a suitable choice for households or individuals looking for a reliable communication tool.

In summary, the VTech Amplified Phone merges cutting-edge technology with thoughtful design, making it an ideal choice for those seeking clarity and ease in their telephone communications. With features like high volume amplification, noise reduction, large buttons, and compatibility with hearing aids, it stands out as a top option for users needing enhanced auditory support.
Top Page Image Contents