VTech Amplified Phone manual Am using

Page 44

Troubleshooting

Problem

 

Suggestion

 

 

There is noise

• The handset may be out of range.. Move it closer to the telephone base..

 

 

or interference

• Appliances or other cordless telephones plugged into the same circuit as the telephone base can cause

 

during a

interference.. Try moving the appliance or telephone base to another outlet..

 

 

telephone

• Other electronic products can cause interference to your cordless telephone.. Try installing your telephone

 

conversation..

as far away as possible from the following electronic devices: wireless routers, radios, radio towers,

 

 

pager towers, cellular telephones, digital telephones, intercoms, room monitors, televisions, VCRs,

 

 

personal computers, kitchen appliances, and other cordless telephones..

 

 

My calls fade

• Microwave ovens operate on the same frequency as your telephone.. It is normal to experience static on

 

your telephone while the microwave oven is operating.. Do not install this telephone in the same outlet

 

out or cut in

 

or near a microwave oven..

 

 

and out when

 

 

• If your telephone is plugged in with a modem or a surge protector, plug the telephone (or modem/surge

 

I am using

 

protector) into a different location.. If this solves the problem, re-locate your telephone or modem farther

 

the cordless

 

apart from each other, or use a different surge protector..

 

 

handset..

 

 

• The layout of your home or office might be limiting the operating range. Try moving the base to another

 

 

 

 

location, preferably a higher location for better reception..

 

 

 

• Disconnect the telephone base from the modular jack and plug in a corded telephone.. If calls are still

 

 

not clear, the problem is probably in the wiring or local service.. Contact your local service company

 

 

(charges may apply)..

 

 

 

• Select channels 4 through 10 for your router (refer to the user’s manual of your router for more

 

 

information)..

 

 

 

• If you still have problems with the telephone or the router, make sure the handset is ON and press

 

 

CHAN/REMOVE until the performance improves..

 

 

 

• Press the CHAN/REMOVE button while on a call until the interference has been eliminated..

 

 

 

• If the other telephones in your home are having the same problem, the problem is in the wiring or local

 

 

service.. Contact the local telephone company (charges may apply)..

 

 

 

• Do you have DSL service? If yes, you need to have a DSL filter installed at every telephone jack that

 

 

has a telephone connected to it. Contact your DSL service provider for filter information.

 

 

 

 

 

 

 

 

 

www.vtechphones.com

41

Additional information

Page 43 Page 45
Image 44
Page 43 Page 45
Contents Table of contents Battery care and performance Replacing the handset battery Need HELP? Before you begin Parts checklistBattery User’s manual Installation Connect power and telephone line cordsInstall handset battery Choose locationWall mounting bracket installation optional Desk/table bracket installationTo attach To remove If you subscribe to DSL serviceBelt clip optional Charge the handset battery Set the dial modeCheck for dial tone LanguageHandset ringer style Set ringer volumeSet handset date and time Telephone operation Handset layoutChan channel Prog program19 20 21 22 Telephone base layoutAnnc announcement Handset operation Press any key to answer a call except OFF, orSelect Increase/decrease speaker volume Telephone base operationSet the answering machine to answer an incoming call Delete one or all messagesTemporary tone dialing Headset jackOperating range Directory Store a directory entryEdit a directory entry Erase a directory entry Move a directory entry to the speed dialDial a directory number Speed dial Store a speed dial entryEdit a speed dial entry Reassign locations in speed dial Delete a speed dial entryDial a speed dial number Caller ID About call history caller ID Review call historyDelete records from call history Dial a displayed numberStore a call history record in the directory Locate the record in call history that you want to dialDisplay screen messages Other party is blocking name and/or numberInformation About this caller’s name and/or numberAudible indicators Setting the clockAnswering system operation About announcementsAnswering system layout Record your announcementReview your announcement Delete your announcementAnswering system setup Feature summaryListen to, save & delete messages Call screening/interceptRecord a memo Delete messagesMessage window To stop recording, press PLAY/STOPIndicates volume level selected when pressing the volume Shows the current remote access codeDisplay when any setting is changed from on or off System is in programming mode or initializingVoice menu Remote accessRemote access commands Access code, then press 0 to turn the answering system on Delete messageMenu announcement to delete all old messages End call PressBattery needs to be recharged Displays when telephone base power is offDisplays when an out-of-range dial fails to Battery level is very low, handset operationsBattery care and performance BatteriesTroubleshooting Place the handset in the telephone base for rechargingManual for further instruction Minute for the cordless handset and telephone base to resetCharge Charge / Troubleshooting Dial mode Using the telephoneCannot dial out First, try all the above suggestions Before dialingAm using My caller ID features Caller ID serviceCall waiting Caller ID service System does notAnswering system Answering system are Call after four minutes IncompleteCall Disconnects the callRemote commands When dialingSystem Handset and the telephone base to synchronizeCommon cure for Or store from the call logMaintenance Limited WarrantyHow do you get warranty service? Important safety instructions FCC, Acta and IC regulations FCC PartRbrc seal Industry CanadaTechnical specifications Index About announcements 26 About call historyPage 91-000913-040-100 User’s manual

Amplified Phone specifications

The VTech Amplified Phone is designed to enhance communication for those who are hard of hearing or anyone seeking clearer audio. This innovative phone combines advanced technology with user-friendly features to provide an exceptional telecommunication experience.

One of the standout characteristics of the VTech Amplified Phone is its significant volume amplification capability. Users can adjust the receiver volume to a maximum of 50 decibels, allowing for a more comfortable listening experience. This level of amplification ensures that even the softest spoken words can be heard clearly. Additionally, the phone is equipped with digital sound processing to eliminate background noise, ensuring that conversations remain crisp and easy to understand.

The phone features large, backlit buttons, making it easier for users with visual impairments to dial numbers without confusion. These buttons are designed to be responsive and tactile, allowing for quicker access during calls. Furthermore, the phone's bright visual ringer ensures users will be alerted to incoming calls, even in noisy environments.

Another essential feature is the built-in speakerphone, which enables hands-free communication. This is particularly beneficial for users who may have difficulty holding a phone up to their ear. With clear, amplified audio on the speaker, users can engage in conversations without straining their hearing.

The VTech Amplified Phone is also equipped with a handy caller ID function. This feature displays the name and number of incoming calls on the large, easy-to-read screen, allowing users to identify calls before answering. In addition, the phone has a memory function that enables users to store frequently dialed numbers, enhancing convenience and accessibility.

Designed with versatility in mind, the VTech Amplified Phone is compatible with hearing aids, providing an added layer of convenience for users who rely on such devices. Its robust design ensures durability, making it a suitable choice for households or individuals looking for a reliable communication tool.

In summary, the VTech Amplified Phone merges cutting-edge technology with thoughtful design, making it an ideal choice for those seeking clarity and ease in their telephone communications. With features like high volume amplification, noise reduction, large buttons, and compatibility with hearing aids, it stands out as a top option for users needing enhanced auditory support.
Top Page Image Contents