VTech Amplified Phone manual Answering system setup, Feature summary

Page 31

•To advance or recede the remote access code number by increments or decrements of ten, press and hold the SKIP or REPEAT key..

Answering system operation

Answering system setup

You can set up one feature at a time, or you can set up the first feature and then move on to set up the other features in sequence..

1. Make sure the answering system is on..

2..Press SETUP until the system announces the feature you want to set.. Refer to the Feature summary below for a description of the features and your choices..

3.Press SKIP OR REPEAT until the system announces the desired setting..

4.Press SETUP to confirm your selection and move on to the next feature, or press PLAY/STOP to exit feature setup..

Feature summary

System announces:

Description/directions:

“Number of rings <current setting>, to change the

To set the number of rings before the

setting, press SKIP OR REPEAT, to continue setup,

answering machine picks up the incoming

press SETUP.”

call.. Two rings, four rings, six rings and toll

 

saver are available.. With toll saver on, the

 

system answers after two rings only if there

 

are any new messages/memos in mailbox..

 

Otherwise system answers after four rings..

 

 

“Base ringer <current setting>, to change the setting,

Activate the telephone base ringer volume

press SKIP OR REPEAT, to continue setup, press

for incoming calls.. Choose between HI, LO

SETUP.”

or OF..

 

 

28

www.vtechphones.com

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Table of contents Battery care and performance Replacing the handset battery Need HELP? Battery User’s manual Parts checklistBefore you begin Connect power and telephone line cords InstallationChoose location Install handset batteryDesk/table bracket installation Wall mounting bracket installation optionalBelt clip optional If you subscribe to DSL serviceTo attach To remove Language Charge the handset batterySet the dial mode Check for dial toneSet handset date and time Set ringer volumeHandset ringer style Prog program Telephone operationHandset layout Chan channelAnnc announcement Telephone base layout19 20 21 22 Press any key to answer a call except OFF, or Handset operationSelect Delete one or all messages Increase/decrease speaker volumeTelephone base operation Set the answering machine to answer an incoming callHeadset jack Temporary tone dialingOperating range Store a directory entry DirectoryEdit a directory entry Move a directory entry to the speed dial Erase a directory entryDial a directory number Store a speed dial entry Speed dialEdit a speed dial entry Dial a speed dial number Delete a speed dial entryReassign locations in speed dial Caller ID Review call history About call history caller IDLocate the record in call history that you want to dial Delete records from call historyDial a displayed number Store a call history record in the directoryAbout this caller’s name and/or number Display screen messagesOther party is blocking name and/or number InformationAbout announcements Audible indicatorsSetting the clock Answering system operationDelete your announcement Answering system layoutRecord your announcement Review your announcementFeature summary Answering system setupCall screening/intercept Listen to, save & delete messagesTo stop recording, press PLAY/STOP Record a memoDelete messages Message windowSystem is in programming mode or initializing Indicates volume level selected when pressing the volumeShows the current remote access code Display when any setting is changed from on or offRemote access commands Remote accessVoice menu End call Press Access code, then press 0 to turn the answering system onDelete message Menu announcement to delete all old messagesBattery level is very low, handset operations Battery needs to be rechargedDisplays when telephone base power is off Displays when an out-of-range dial fails toBatteries Battery care and performancePlace the handset in the telephone base for recharging TroubleshootingCharge Minute for the cordless handset and telephone base to resetManual for further instruction Charge / Troubleshooting Before dialing Dial modeUsing the telephone Cannot dial out First, try all the above suggestionsAm using System does not My caller ID featuresCaller ID service Call waiting Caller ID serviceDisconnects the call Answering systemAnswering system are Call after four minutes Incomplete CallHandset and the telephone base to synchronize Remote commandsWhen dialing SystemOr store from the call log Common cure forLimited Warranty MaintenanceHow do you get warranty service? Important safety instructions FCC Part FCC, Acta and IC regulationsIndustry Canada Rbrc sealTechnical specifications About announcements 26 About call history IndexPage 91-000913-040-100 User’s manual

Amplified Phone specifications

The VTech Amplified Phone is designed to enhance communication for those who are hard of hearing or anyone seeking clearer audio. This innovative phone combines advanced technology with user-friendly features to provide an exceptional telecommunication experience.

One of the standout characteristics of the VTech Amplified Phone is its significant volume amplification capability. Users can adjust the receiver volume to a maximum of 50 decibels, allowing for a more comfortable listening experience. This level of amplification ensures that even the softest spoken words can be heard clearly. Additionally, the phone is equipped with digital sound processing to eliminate background noise, ensuring that conversations remain crisp and easy to understand.

The phone features large, backlit buttons, making it easier for users with visual impairments to dial numbers without confusion. These buttons are designed to be responsive and tactile, allowing for quicker access during calls. Furthermore, the phone's bright visual ringer ensures users will be alerted to incoming calls, even in noisy environments.

Another essential feature is the built-in speakerphone, which enables hands-free communication. This is particularly beneficial for users who may have difficulty holding a phone up to their ear. With clear, amplified audio on the speaker, users can engage in conversations without straining their hearing.

The VTech Amplified Phone is also equipped with a handy caller ID function. This feature displays the name and number of incoming calls on the large, easy-to-read screen, allowing users to identify calls before answering. In addition, the phone has a memory function that enables users to store frequently dialed numbers, enhancing convenience and accessibility.

Designed with versatility in mind, the VTech Amplified Phone is compatible with hearing aids, providing an added layer of convenience for users who rely on such devices. Its robust design ensures durability, making it a suitable choice for households or individuals looking for a reliable communication tool.

In summary, the VTech Amplified Phone merges cutting-edge technology with thoughtful design, making it an ideal choice for those seeking clarity and ease in their telephone communications. With features like high volume amplification, noise reduction, large buttons, and compatibility with hearing aids, it stands out as a top option for users needing enhanced auditory support.
Top Page Image Contents