![](/images/new-backgrounds/1197702/19770217x1.webp)
Installation
Unpacking
The package contains the following items. Contact the shipper or your Audiocom dealer immediately if anything is damaged or missing. Detach and fill out the registration card and return it to Telex to properly register your US2002.
Quantity | Description |
|
|
1 | US2002 Intercom Station |
|
|
1 | Warranty and registration card |
|
|
1 | User Manual |
|
|
4 | Rubber feet for desktop use of the US2002 |
|
|
1 | Termination plug for special applications (Figure 13, page24) |
|
|
Configuration Pre-check
Before connecting the US2002 make sure that it is properly configured for your intended usage. Figure 2 shows the locations of the configuration jumpers and switches. To access internal switches and jumpers, remove one screw from the top cover and three screws from each side. Note, that switch SW2 can be accessed through the back panel.
☞If you change any switch settings while the US2002 is operating, you must perform a
reset: either cycle power off then on, or simultaneously press the All Talk and Listen 1 keys, then release them. The sidetone controls are adjusted after