Telex manual Intercom User Station US2002

Page 19

Note: For further information about the cable numbers, see page 14.

Note: A BOP-1000 may be used to rack mount 2 TW-7W splitters.

Figure 7. US2002 Monaural Master Speaker Station Configuration with 2 Power Supplies.

This is a good configuration for large intercom systems when you want to operate the US2002 as a master speaker station, with one speaker to monitor both intercom channels. In this configuration, the SPS2001 and PS2001L Combine/Isolate switches are set to the Combine position. With this setting all intercom stations connected to the SPS2001 are combined on intercom channel 1 and all intercom stations connected to the PS2001L are combined on channel 2. The amplified speaker in the SPS2001 is used as the speaker output for the US2002 and the US2002 dip switches are set to monaural operation (default setting) so that both intercom channels are heard in the speaker. The PA-KP local power supply is optional. When a PA-KP is connected, the US2002 automatically disconnects from system power. Since the US2002 is not drawing power from the intercom system, more system power is available for additional belt packs, etc.

Intercom User Station US2002 - 19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Telex Page FCC Statement Table of Contents Index of Figures Introduction US2002 Reference View See numbered features, Features Unpacking Configuration Pre-checkConfiguration Switch Settings Headset Microphone Type Selection DIP Switch For binaural operation with 2 speakers Jumper Description Setting for JumpersCentral Master Station vs Remote Station Mounting ConfigurationsExternal Program Input and PA Output Intercom User Station US2002 Intercom User Station US2002 Intercom User Station US2002 Intercom User Station US2002 Intercom User Station US2002 Intercom User Station US2002 US2002 Headset Station Configuration with 2 Power Supplies Typical Remote Headset Station Typical Remote Monaural Speaker Station Typical Remote Binaural Speaker Station An example of all locally powered US2002 intercom stations External Audio Input and PA Output Audiocom Intercom Cables Intercom User Station US2002 Power-Up Check Intercom User Station US2002 US2002 Bottom View Volume Adjustment Normal vs Programming ModeReceiving Calls Microphone Mute During Talk Using Mic Kill Program Input GeneralDynamic-mic Headset Panel Microphone or Electret-mic HeadsetSpeaker Output PA OutputExpansion Input /Output Headphone Amplifier External PowerPanel Microphone Amplifier Factory Service and Parts Information Page Quick Reference 9350-7748-000 Rev. A, 1/2003
Top Page Image Contents