Telex manual Intercom User Station US2002

Page 29

If you are using headphones that completely enclose the ears, adjust sidetone as follows:

1.Tap the Headset key to turn the headset microphone on.

2.Tap the channel 1 Talk key to turn it on.

3.While speaking into the microphone, use a small flat-bladed screwdriver to adjust the channel 1 sidetone so that you hear your voice at an acceptable level in the head phones. Tap the channel 1 Talk key to turn it off when finished.

4.Tap the channel 2 Talk key to turn it on, and adjust the channel 2 sidetone as for channel 1. Tap the channel 2 Talk key to turn it off when finished.

Intercom User Station US2002 - 29

Image 29

Contents Telex Page FCC Statement Table of Contents Index of Figures Introduction US2002 Reference View See numbered features, Features Unpacking Configuration Pre-checkConfiguration Switch Settings Headset Microphone Type Selection DIP Switch For binaural operation with 2 speakers Jumper Description Setting for JumpersCentral Master Station vs Remote Station Mounting ConfigurationsExternal Program Input and PA Output Intercom User Station US2002 Intercom User Station US2002 Intercom User Station US2002 Intercom User Station US2002 Intercom User Station US2002 Intercom User Station US2002 US2002 Headset Station Configuration with 2 Power Supplies Typical Remote Headset Station Typical Remote Monaural Speaker Station Typical Remote Binaural Speaker Station An example of all locally powered US2002 intercom stations External Audio Input and PA Output Audiocom Intercom Cables Intercom User Station US2002 Power-Up Check Intercom User Station US2002 US2002 Bottom View Receiving Calls Normal vs Programming ModeVolume Adjustment Microphone Mute During Talk Using Mic Kill Dynamic-mic Headset GeneralPanel Microphone or Electret-mic Headset Program InputExpansion Input /Output PA OutputSpeaker Output Panel Microphone Amplifier External PowerHeadphone Amplifier Factory Service and Parts Information Page Quick Reference 9350-7748-000 Rev. A, 1/2003