Telex XO-AP XO-1 manual Introduction, General Description, System Features

Page 3

Section 1 - Introduction

General Description

The Telex Legacyä Series is a full duplex (simultaneous talk and listen), multi-channel, wireless intercom system. Legacy offers a complete solution for 2 to 7 coaches per sideline, fast and easy set-up, durable beltpacks, 64 bit audio encryption, and professional grade headsets.

The main components of the Legacyä series consists of the XO-1 beltpack and the XO-AP base station.

The XO-1 beltpack offers the user two separate audio channels and the ability to communicate on both channels at the same time. The user can talk and listen on these channels or just turn off the talk button and listen only. The beltpack uses an internal rechargeable Li-Ion battery that will provide up to 8 hours of uninterrupted operation.

The XO-AP base station can support up to seven XO-1 beltpacks. The base station provides a central relay location which handles the audio traffic between beltpacks. The built-in base station intelligence called ClearScanautomatically selects the best RF (Radio Frequency) channel for communications on start-up. The base station also uses an internal rechargeable Li-Ion battery that will provide up to 10 hours of uninterrupted operation.

System Features

Easy base station and beltpack setup.

Uses mature 2.4GHz IEEE 802.11 Wireless LAN Technology.

Audio in the system is encrypted via a 64 bit DES algorithm.

Base station automatically selects the clearest RF channel for the system, and sets the system on that channel. No user intervention is needed.

Easy to read base station LED display to indicate the RF channel of the system.

If desired, the user can select any one of the eleven standard 802.11 channels for the system to operate via a single button on the XO-AP front panel.

Durable, water resistant, ABS, beltpack cases.

Dependable, rechargeable, wide temperature range, Li-Ion batteries.

Low battery indications on the beltpack and base station.

Base station can be powered from external AC or internal battery.

1-1

Image 3
Contents Operating Manual Table of Contents System Features IntroductionGeneral Description Rear View XO-AP Base StationControls and Connections Front ViewXO-1 Beltpack Top ViewBottom View Legacyä Technical Specifications SpecificationsXO-AP and Panel Antenna OperationSet-up System OperationTop View Bottom View Charging Instructions HalftimeBefore the Next Use Long Term StorageLi-Ion Batteries Encryption Code Encryption CodeLogging into a Beltpack XO-1 Beltpack Options Login telex Enter Password legacy EnterProblem Possible Cause Solution TroubleshootingTroubleshooting RF Channels RF ChannelsRegulatory Information Regulatory InformationAccessories and Replacement Items ANT-FPM Accessories and Replacement ItemsEast Cornhusker Highway, Lincoln, NE