•Suspend frequently. Use the Power control panel to shorten the length of continuous idle time before your V35
•Always use AC power when connecting your V35 to your PC. Note that your V35 will not
•Turn off sounds. Use the Sounds & Notifications control panel to turn off all but the most necessary system sounds.
•Avoid using memory card accessories while on battery power. Some memory cards use considerable power and will quickly drain your battery.
•Do not “listen” for infrared transfers. Although you can set your Pocket PC to constantly monitor the IR port for files sent from other devices, doing so will quickly drain your batteries.
Managing Memory
Your V35 uses two kinds of memory: storage and program memory (RAM), and optional memory cards.
Storage and Program Memory
RAM (Random Access Memory) on your V35 is shared between storage memory and program memory. “Storage memory” is used to store the data you create and additional programs you install. “Program memory” is used to run programs on your V35. Your V35 automatically manages the allocation between storage and program memory. However, in some situations, such as when the memory is running out, your V35 may not be able to automatically adjust the allocation.
Memory Cards
Memory cards are small, removable flash storage cards that enable you to expand the memory of your V35. You can use memory cards for backup storage, archives, or to transfer large files to other devices. Your V35 supports Secure Digital memory cards. Memory cards can be purchased from a variety of
SDRAM Memory Allocation
Please see “SDRAM Memory Allocation” in the Appendix on page 84.
32 | ViewSonic Pocket PC V35 |