Polycom 1725-16828-001 manual Registration reg

Page 43

Configuration Files

•Messaging <msg/>—To select up single-press voice mail.

•User Preferences <up/>—To provide the location of the digital pictures on the USB flash drive and to enable the screen saver feature.

Registration <reg/>

The Polycom VVX 1500 C phone supports six registrations.

To set up registered lines, edit the reg parameter to reflect the changes you made when you configured Cisco Unified Communications Manager. For example:

Note	Fields are defined as follows:
	• address is the assigned extension in Cisco Unified Communications Manager
	(refer to Configuring Cisco Unified Communications Manager on page 2-1)
	• auth.userId is the end user created for device in Cisco Unified
	Communications Manager (case sensitive)
	• auth.password is the digest credentials from the user in Cisco Unified
	Communications Manager (case sensitive)
	• server.1.address is the IP Address of first Cisco Unified Communications
	Manager subscriber
	• label is the label that appears on the phone display’s line key
	The “1” above indicates which line appearance is being configured. In this case, it is
	the first.
	If you want to use server failover, the name entered in the DNS cache—refer to
	DNS Cache <dns/> on page A-4—should be entered in the
	reg.1.server.1.address field instead of an IP Address.

A - 5

Image 43

Contents

SIP 3.2.2 July 2010 1725-16828-001 Rev. B1 Trademark Information About This Guide Deployment Guide for the Polycom VVX 1500 C Contents Troubleshooting the Polycom VVX 1500 C Phone Overview Supported Phone Features Unsupported Cisco Features Unsupported Phone FeaturesTopics Not Mentioned in This Guide Deployment Guide for the Polycom VVX 1500 C Changing Cisco Unified Communications Manager Configuring Cisco Unified Communications ManagerSelect +Add New Select Third-party SIP Device Advanced and click Next Select the Enabled Digest Authentication check boxDeployment Guide for the Polycom VVX 1500 C Part III Adding a Device Entry Select Device Phone +Add New Select Third-party SIP Device Advanced, then click Next Configuring Cisco Unified Communications Manager Deployment Guide for the Polycom VVX 1500 C Configuring Cisco Unified Communications Manager Deployment Guide for the Polycom VVX 1500 C Refer to Upgrading the Phone’s Software on Setting Up the Polycom VVX 1500 C PhoneChanging the Network Configuration Recommended Options Required OptionsYour phone will reboot Setting Up the Provisioning Server2345-17960-001.sip.ld Phone1.cfg Sip.cfg 000000000000.cfg For example, C\test\VVX1500Local Digit Map Configuring Your SystemCall Log Call TransferRecording and Playback of Audio Calls Digital Picture Frame Corporate DirectoryServer Redundancy Shared Call Appearances Voice Mail IntegrationPhone-phone1MACAddress.cfg and MACAddress.cfg-and one Deploying Phones From the Provisioning ServerCreating an Application Configuration File Creating a Master Configuration File Advanced Reboot Phone Add contents to the master configuration file. For exampleLocating the Latest Software Upgrading the Phone’s SoftwareDownloading New Software to the Phone Deployment Guide for the Polycom VVX 1500 C Troubleshooting the Polycom VVX 1500 C Phone Polycom VVX 1500 C Display CallingUpgrading the Polycom VVX 1500 C Phone Per-Phone Configuration File phone1.cfg Configuration FilesUsing the Web Interface on page B-1 Master Configuration FileDial Map dialmap Application Configuration FileFeature feature Per-Phone Configuration FileDNS Cache dns Registration reg User Preferences up Messaging msgModifying Phone’s Configuration Using the Web Interface Miscellaneous Administrative TasksDeployment Guide for the Polycom VVX 1500 C Select Local Settings Deployment Guide for the Polycom VVX 1500 C Miscellaneous Administrative Tasks Deployment Guide for the Polycom VVX 1500 C Index Deployment Guide for the Polycom VVX 1500 C